400ex T Pin Fornt end

[AFTERMARKET]

Like I told you. I finaly got off my Butt and took some pictures of the Front end of the Ex. This is for all the people that said that Laeger's did not make a T pin for the 400ex.

The blue one is the R and the red one is the Ex ( DUH) :rolleyes:
Sorry the Ex is sandy from Glamis. Dont Really ride it that much so it gets cleaned sometimes :)
The Rest of the picts can be found here
http://www.chummin.com/images/dallas/

http://www.chummin.com/images/dallas/D_9.jpg

[racerx573]

Whered you order it from?

[AFTERMARKET]

Ordered it from Laeger's
909-693-9048

[400exBro]

sweet, how much do they run for, if i may ask???

i think i might be looking at some t-pins now:cool:

[RiPPiNiTuP7]

SWEET!!!!!!!

[Dave400ex]

Very nice. How good does it ride?

[AFTERMARKET]

Same set up on my R love it. I will never ride anything AGAIN!
The PEP / Laeger's set up can not be beat!

[racerx573]

She probly paid about $2200 for it, cuz that's what they usually cost. And then $900 for the shocks, am I right?

I think Axis/Laeger's might beat PEP, lol...it's a preference thing, haha


(FIXED IT ;) )

[AFTERMARKET]

Can't rember the price. After a while its just a blur :macho :macho :ermm:

[forum]

only problem with t-pin is they have to be maintained ware as ball joints don't. But it is the only true bindless system on the market. The front end is mostly the front shocks. If the motion allowed is enough to use the same shocks the the t-pin uses there is really no benifit of using a t-pin. Many of the top guys are runing walsh. THey use a diferent setup by locateing the shock mount on the a arm farther out and lower then a standard a arm. Either way any lt Setup is good. If i were building a machine with no budget it would use either t-pin or maybe walsh. But you have to ask yourself if the extra high price tag will actualy make much of a difference. my opinion is that it wont.

[Rip_Tear]

Your EX looks beaut E ful! Are those plastics orange or red?

[400exBro]

it is red...


are those long travel a arms?
if not does Laeger make lt +3 a arms for the 400ex?

Originally posted by 400exBro
it is red...


are those long travel a arms?
if not does Laeger make lt +3 a arms for the 400ex? yes they make +3 L a-arms for a 400ex....but not to sound retarded here...but what exactly is a y-pin setup

[AFTERMARKET]

Plastics are Red.
The upkeep on the front end is nothing. The Bushings are made of brass and brass is soft. So replace the brass bushings and the bearings in the spindle's and thats it. And thats NOT very often.
Nothing but good results with the T Pin and my PEP.

[Dave400ex]

Terko440 has Leager LT +3 on his 400ex. They look sweet...

[AFTERMARKET]

All the people that dident belive it. Were are you? :p