PDA

View Full Version : AC PROPEG INSTALLATION HELP



Alberta EX
01-14-2002, 12:11 PM
I just got my Propegs today, no instructions. I have a couple of questions. Do I use the stock bolts or replace them with the ones that came with the nerfs. The black steel parts that bolt on where the old pegs were, one has a spacer welded to it which side does it go on and which way is up? 10 Bolts, 8 nuts and some washers came also, the 4 big bolts have shims that slide over them are these used to bolt the black parts up to the old foot pegs? What are the 4 small bolts used for? and the 2 bolts that have no nuts?
Any help would be greatly appreciated.

knighttime
01-14-2002, 12:30 PM
:confused:

knighttime
01-14-2002, 12:31 PM
another one

Alberta EX
01-14-2002, 12:39 PM
Thanks knighttime, that helps some

knighttime
01-14-2002, 12:44 PM
More pics are coming. Also I believe the big spacers are for the mounting it to the motor (front of nerfbar), and the small spacers are for the heal guard mount.

knighttime
01-14-2002, 12:46 PM
another

knighttime
01-14-2002, 12:48 PM
Bang on it so it fits snug. I wrapped some duct tape around the black peg to make it fit more snug. Others have drilled holes and used bolts, and one dude even made spacers out of pvc pipe.:eek:

knighttime
01-14-2002, 12:50 PM
u r gettin closer, time to start thinkin about the mud guards, make sure u mount these, they make the pegs sturdier, plus make it safer, and less mud will hit u

knighttime
01-14-2002, 12:52 PM
Ok, to install these first drill the holes in the side of the footpegs. Then line up the heel guards and using a black marker, mark where the holes should go in the guard. Now take the guards off and drill those mofo's. Now install the guards, using the spacer where the guards mount to the nerf itself.

knighttime
01-14-2002, 12:55 PM
This is a current dues paying, card carrying, Exriders.com member with a potato gun ready for some type of mission i think.

Can u guess who he is?

01-14-2002, 01:01 PM
I know the answer and I know that because of the adult beverage he is drinkin,,,,it's not knighttime cuz he can't afford that particular brand from what I hear..:eek:

I do like the custom tater gun mounted through the handy bars.:D


Hey knight,,,,did you put the stock muffler flange back on for a reason or just to hold the powerbong to the muffler a little better??

knighttime
01-14-2002, 01:10 PM
I never rec'd a flange from FMF. Hmm, looks like ill be makin'a phone call.

knighttime
01-14-2002, 01:12 PM
I had to do a little filing to make the nerfs fit over the black pegs. (It was a weld bead that needed removed).

knighttime
01-14-2002, 01:13 PM
Here is the pro-peg kit in pieces.

knighttime
01-14-2002, 01:13 PM
w/o nets or heelguards

schism_rhs
01-14-2002, 01:48 PM
How much are these AC Propegs ???

they look sweet !

MOFO
01-14-2002, 01:58 PM
Oh boy, that picture made it on here....LOL! That there potato gun is our version of the anti-taliban exterminator. All EX's should come with this option.


Boy, that is a bad pic....:o



Eric

01-14-2002, 02:05 PM
Originally posted by knighttime
I never rec'd a flange from FMF. Hmm, looks like ill be makin'a phone call.

Well mine didn't come with one either,,the powerbong just slid right into the PC4, rubber O-ring inside the PC4 makes it a some what tight fit,,,I was just wonderin,,I don't think I could put my stocker clamp back on,,,it won't fit I don't think..:confused: