in need of SBC (small block 350) parts please look

[330EXman]

i need some parts for the old chevy

a crank(must be forged or heavy duty to handle 450hp)
rods(stage two or h-beam forged or aluminum)
tight vakve springs
any blocks big block or small you might want to get rid of
any complete stock or modded comlete or short blocks

any kinds of heads for small or big chevy
cams
pistoms
blowers
2 speed trannys
built trannys

any parts let me know at m13jason13@aol.com

[L.Vegas400]

are you starting a sbc shop or somthin

[DREWS400EX]

I have a set of stock bbc heads. Early '80s I think. Closed chamber, oval port. $75 + shipping.

[crazybuffalo]

i have some but i will be in need of many soon so after im done ill see whats left you need. also i need some bbc parts.(big block chevy)

[Guy400]

I've got a set of Dart Iron Eagle cast heads that were built and never used. Fully ported and I've got all numbers on them. Come complete with 2.02in/1.6ex Manley Race-flo valves with 3-angle. Guideplates, 7/16" screw-in studs, Comp Cams valvesprings, Comp Cams one-piece chromoly pushrods (standard length). These are bolt-on and go heads. Stock castings were $550 and with all the parts and port work I've got over $1100 in receipts in them. Like I said, these heads have never been run. I'll sell them for $900.

I've also got a Comp Cams Hi-Energy or Extreme Energy cam (can't remember which) but don't remember any specs on it. Again, this is brand new in-the-box and never used. Let me find out which cam it is and I'll give you a price.

These are all for SBC.

[330EXman]

i like the heads GUY

but im not sure on them yet im kinda of looking for a rotating assmebly for a SBC right now i need to get my old chevy on the road then i will start stocking heads and **** but right now i built my old chevy up and the ****a blew the number two rod off cause of a faulty crank oil port any way looking to get that moving right away again cant wait to hear the old kieth black 355 thunder again

also looking for a inake manifold for a 1994 ish vortec heads this intake needs to have the to middle bolt holes but on these heads the bolts go stright down not at a angle

also looking for carbs
Demons,edelbrock

[Guy400]

I've also got a Pete Jackson quiet gear drive still in the box--$125 and I'll pay the shipping.

[sickyellow400ex]

my friend has a complete 350 for sale i think he wants like 300 for it, he also has a TH400 tranny

[330EXman]

tell me bout the motor miles condition anything done to it and parts replaced or put on?

also the tranny if the 400 is perfect doesnt need a rebuild i will want that not sure ont he motor yet i know if anybody has a 2 speed powerglides i will buy em up or any built trannys except 700r4's will most likly take any tranny that is in perfect shape with full manual shifting and or shift kits

as for the gear drive timing assembly i would only want it if it was a noisy set up and i can get the pete jackson cheaper sorry guy

Guy400 didnt you have alot of chevy SBC stuff for sale awhile ago like a short block 327 and so on? where it go if it was you?

[sickyellow400ex]

im not sure about the motor all i know is it came out of an 87 granprix, then in a 86 monte carlo now its sitting. and it needs to be rebuilt. i think the tranny is all good, ill have to talk to him

[sickyellow400ex]

the 350 also has a chrome dress up kit

[Guy400]

I've got a 4-bolt main block but nothing you'd really want. My 327 crank is a factory cast unit and so are my rods. My rods have been weighted end-for-end, though. I'd like to keep my 4-bolt block however. I've got a couple TH350's laying around but they need rebuilt, a junky 700R4, and one Powerglide. Holding onto the 'Glide though in case I'd get back into dragging one day. Really, I'm only interested in selling the top half of my motor. I believe you already bought my intake and MSD ignition pieces. If I can sell my heads than I'd be alright. I'll take my block and seal it up and wait for a rainy day:)

[330EXman]

hey man you said that trannys and motor are in a monte carlo right now

ive been looking for a monte carlo to race in if you have a beat up montecarlo with a running 350 and tranny i will buy it off you right now let me know asap

where you from

[sickyellow400ex]

man ur like 1 week to late he just sold his monte carlo. he still has the engine and tranny tho. he also has an 85 monte carlo ss with the 305. he might trade that and the engine and tranny for a 4x4 chevy pickup. i am located in beverly massachusetts.

[330EXman]

how much does he want for the 85 with a 305? what kind of tranny does that one have and what kind of shaope give me pics i live in maine and can come down there this weekened to pick it up lol

give me price for just the car

and a price for the car and motor and tranny extra