quick carb question!

[300EXrider02]

I am wondering what to do....
When the quad is idling, and I just pin it, it will bog, and almost die right on the spot until I let the throttle off....where should I work with the carb....main, needle etc, what to do?

[300EXrider02]

no one knows....hmmm:ermm:

:uhoh:

[250EXking]

check the plug. then my next guess would be needle. and piolot jet.

[kargaaro]

pilot is the first 1/8 of your throttle. Could be anything though. Maybe dirt in the carb. Try taking the carb off and cleaning it.

["BLAHH"300!!]

....I know what your talkin' about man, but don't know a fix for it.

What he means is...if lets it sit idle, then stabs the throttle and holds it WOT, it'll die, like you just hit the kill switch.

I don't know if it's not getting enugh gas,
or if it's getting too much gas all at once,..
..I had one go almost dead, then spark back up and rev out.
...seams like it's not getting enugh gas,
getting tons of air, but no fuel...so where would you start your jetting?...main jet?...that control's WOT right

EXrider02...You feel any hessitaion at 3/4 or WOT while in gear riding?

[300EXrider02]

nope, blahh, your running lean, i can tell from what your saying, go down on the needle one, and up the pilot, turn the air/fuel crew about 2 then to 4 and see which one is better