416 owners...please read...

[Glamis400ex]

All who have a 416 and cam, please post your carb set up.
-STOCK CARB ONLY-

1)pilot jet size
2) how many turns OUT on the air screw
3)needle position
4)main jet size...NO DYNOJET SIZES PLEASE-ONLY KEIHIN
5)elevation/altitude
6)airbox lid on/off or holes

Thanks a bunch...:cool:

Glamis

[bad-boy-416]

with mine i ran a 52 pilot and a 180 main with the needle on the 3rd notch . air box lid off . i'm below 3000 feet .

[L.Vegas400]

i would like to know also, if i ever get the damn thing back together............

[YZROOSTINYA]

45 pilot
4th clip down
155-158 main
2.5 turns out

6 one inch holes in lid
check sig for motor work
below 2k I believe

pilot 42

main 155 dyno

4,,,,,, 2 inch holes in airbox

needle clip on 2nd from bottom

airscrew 3 turns out..

[F-16Guy]

165 main (DJ)
42 pilot
2 3/4 turns out
needle in stock position
8 2" holes in airbox/lid
ground header welds
choke removed
E-Series slip-on
about 1200 ft.

[skemp]

-42 pilot
-2.5 turns out on air screw
-stock needle raised one notch
-165 main with 3 one inch holes in lid or 170 main with no lid (Keihin)
-400-800ft. elevation

[Bud88]

165 main
42 pilot
i notch down from stock
1/1/2 turns out
choke removed
500 feet

[kargaaro]

45 pilot
middle notch (stock)
155 Main
2.5 turns out (stock)

Keihin!!

Open box with K&N

[Glamis400ex]

Hey all you guys,

Thanks, I'm just trying to get an average so I have a place to start from...thanks a bunch

Pretty consistant really...all these set ups.

Glamis

[L.Vegas400]

how about sending this to the FAQ section....

[BigThumper33]

182 main
42 pilot
3rd groove on the needle
air screw 2 3/4 out
less than 3000ft

[BadA$$440]

Originally posted by bad-boy-416
with mine i ran a 52 pilot and a 180 main with the needle on the 3rd notch . air box lid off . i'm below 3000 feet .

your 3,000 ft BELOW sea level?:huh :huh :huh :huh

[bad-boy-416]

Originally posted by BigThumper33
182 main
42 pilot
3rd groove on the needle
air screw 2 3/4 out
less than 3000ft i was talking about a 39 fcr. my bad!!!

[BigThumper33]

I'm not! ;)