manual discrepancy?/

[L.Vegas400]

in the service maunual for a 400 it says there is an o-ring that goes on the bottom of the cylinder and a gasket also???

[hondafox440]

I'm trying to remember if there is one down there, but I do remember reading that n the manual. I dont recall seeing one on the cylidner itself, but there MAY be one on the engine block.

[Castor-426ex]

ok there is a base gasket and an o ring that goes around the sleeve its up in the jug and hard to see but it is there

[L.Vegas400]

i didnt see one when i took it off, so im going to the store tomarrow and see if they have one, if so i guess it needs one.

in the exploded view of the top end it doesnt show one, but it reads as if there should be one in addition to the gasket.

[YZROOSTINYA]

there is a o-ring that fits at the base of the cylinder

alot of peiople dont use them or dont replace them.

I did it in mine when i did my motor work.

the base gasket itself is FAR more important

[L.Vegas400]

i looked again and looked careful this time. and what do ya know,, an o-ring

[JabberJaw]

A manual discrepancy is when someone calls you "STUPID",

an automatic discrepancy is when "they just know your'e stupid!".

[L.Vegas400]

***

havent seen you around in a while...

[JabberJaw]

I know, I been outside playing.

[L.Vegas400]

with the little kids i suppose:blah: