Clutch perches

[Chanman420q]

I need a new one, the stock one is anoughing. What makes 1 clutch perch better than another and what are your favorite ones

a better one will have an easier pull. just pick up a PEP for 30 or a MSR Raptor.

[Doibugu2]

don't get a magnum, they are junk. I like my MSR because the lever is slightly larger than a stock one. easier to grab I guess.

[RiPPiNiTuP7]

Originally posted by Doibugu2
don't get a magnum, they are junk.

Hehe, you bought one too huh? Mine was the biggest piece of crap ever. I'm now running a RTC.

[Doibugu2]

When I put it on, I thought it was garbage, then I rolled my quad and I broke it the first time out. Sure glad I did it, because the MSR is much better.

[QuadTrix6]

i hear the raptor breaks cables :ermm:

[jamiesel]

I like my rtc better then raptor.

[toby400ex]

last sunday i was just doing soe practice starts out at the track, get to the first turn and my lever starts floppin around. The lever broke right where the cable hooks in. Lucky for me a fellow exrider lent me his so i could break my wrist in the second moto. Im gonna sell the msr perch to my bro and buy a pep lever and perch:blah:

[Pvt. Maggot]

i love my moose xr clutch and perch...little longer lever...only thing i didn't like was the adjuster i broke it right off so i just put my stock one in and bingo all better. :devil:

[Chanman420q]

im not sure right now...... i think the RTC is my best bet, the raptor brakes cables, i heard the same about pep and the magnums brake......

[RiPPiNiTuP7]

Originally posted by Chanman420q
im not sure right now...... i think the RTC is my best bet, the raptor brakes cables, i heard the same about pep and the magnums brake......

You got it.

i just bought a magnum ez-pull clutch....are they alot easier to pull than the stock one? how hard are they to install? I heard they break easy....is it true? I paid $25.00 for it shipped.

i like pep

[EvilJester400EX]

I run a RTC easy adjust lever. Most people don't set their PEP's up right and that's what causes them to snap and fray cables.

[motoboy66]

MSR Dominator, XR400 pull. This lever is great on the EX. It is well built, has the Teflon ring so it will turn in a crash, and it is cheap. I got both the lever and perch for $18, and that was from a local dealer. Whatever you get make sure to put Teflon tape around the bar so it will rotate in a crash.

Todd

[AFTERMARKET]

PEP EZ Pull

[motoboy66]

The Raptor pearch breaks cables. My buddy road for less than 3 hours befor his cable broke. somehow this lever chafes the cable at the lever.

[lil400exman]

i am going wit RTC!:devil:

[DEAL]

I'm buyin this one next...
My emgo broke on the weekend, friggin pos.

[EvilJester400EX]

Doesn't the ASV clutch perch setup flip forward if you wreck?

[Chanman420q]

Originally posted by DEAL
I'm buyin this one next...
My emgo broke on the weekend, friggin pos.


how much are those and where do ya get them?

[EvilJester400EX]

I believe the ASV clutch runs you about $90 (what my local shop sells them for at least).

[Chino]

I havent had any problems with my msr raptor yet...... knock on wood :macho

[fasterz]

im runnin the magnum and have had no problems wit it beside the gold adjuster in junk so i just used the stock adjuster and it works great

[wilson10]

I just got the MSR Dominator lever and perch for a CR ($16 at local shop) and I also bought one of those little lube tools for the cable. WHAT A DIFFERNECE compared to stock. This is not "technically" an EZ pull lever but it is easier and levers for CR's are abundant when needed!

[AC 400 ex 02]

i bought the ASV about 4 months ago and returned it to my local shop about a week later cuz it sucked, it made the clutch pull harder and didnt do much when i rolled it and then i bought an Applied racing star adjust lever, i love the thing so much and im so glad i bought it

[Chanman420q]

Originally posted by EvilJester400EX
I believe the ASV clutch runs you about $90 (what my local shop sells them for at least).


:eek:

i hated
Originally posted by AFTERMARKET
PEP EZ Pull :o i hated my pep....and i dont realy like my raptor too much..im goin with rtc after i get my suspensions set up properly

[EXracer8604]

i have a MSR cr perch with a emgo cr lever i love with setup

[LRD_27]

I like my MSR clutch lever and they work great.And they don't broke the cables.

just dont use the perch to shift, simple as that, then u save money and weight:blah:

Originally posted by AFTERMARKET
PEP EZ Pull