# plates

[MojaveKing]

hey....i just ordered a #plate smoothy hood for my Mojave and i want some #s on both sides of my rear plastic....so i was wonderin what i would get to put on there.....that would stick on...and wouldnt just fall off after the 1st wash...and then have my #s on them....thanks.
get back to be ASAP

[exriderdude]

hmmm....well i dont know what exactly your talking about, but if you get number backgrounds and put em on your back fenders, and then put numbers on them they should stick....rub alcohol on the plastic first, it will make it stick better;)

Originally posted by exriderdude
hmmm....well i dont know what exactly your talking about, but if you get number backgrounds and put em on your back fenders, and then put numbers on them they should stick....rub alcohol on the plastic first, it will make it stick better;) and no, these do not come off after 1 wash....they are a thinck sticker with a very heavy amount of sticky stuff on the back, they are made to not come of uness you try, and even then its hard...jsut hope you dont screw up putting back grounds on

heres a pic of my plastic number plates that go on the subframe

[MojaveKing]

thanks....ya like thats what i want!! in thos Pictures.......what kind are they??

will Any kind of type back ground work??

www.propartsracing.com or www.nacsracing.com they both sell number plate backgrounds..nacs sells everything though, numbers, plates, back grounds...etc

[YamaWarr0121]

here's mine, i powerwashed my quad about 5 times and didnt even come up a lil bit, i have a lil bubble in one on my warrior but thats cos i put them flat down wihtout ne thing. i put a lil dishsoap on my dale and dont have any marks at all

[RIDER11X]

Originally posted by nacsracer27
and no, these do not come off after 1 wash....they are a thinck sticker with a very heavy amount of sticky stuff on the back, they are made to not come of uness you try, and even then its hard...jsut hope you dont screw up putting back grounds on

Does your front background want to lift on the front edge where the nose rolls down? mine does.:(

[MojaveKing]

ok,......what i was lookin @ in Dennis Kirk....is N-style......Cut to fit Back grounds??? would these stick like stickers to my fenders??
pic of back grounds

[MojaveKing]

ok,......what i was lookin @ in Dennis Kirk....is N-style......Cut to fit Back grounds??? would these stick like stickers to my fenders??

pic of back grounds from Dennis kirk

[MojaveKing]

well.....see thats were i want to put # plates and then the Numbers!!

here s theh **** from Dennis Kirk
get back to me ASAP

[RIDER11X]

Just order a set from a place like Nac's, TMM, K&K, etc.. Much nicer.:)

[MojaveKing]

i know it would be.......but i wouldl like it to look like how i have it taped off....on my mojaves fenders........would it work? tha way i want to go??

Originally posted by RIDER11X
Does your front background want to lift on the front edge where the nose rolls down? mine does.:( nah..you gotta have skill and know how to put them on correctly:cool:

[MojaveKing]

well...........:confused: :confused:

[MojaveKing]

bump....well...

[MojaveKing]

bump?:confused: :confused:

[RIDER11X]

Of course they will work, but any sharp corners may have a tendency to peel or lift.:eek:

[MojaveKing]

so.....that stuff in Dennis Kirk i showed u guys........will Work??

[MojaveKing]

well....the stuff from DK work??:confused: :confused:

[quadrcr87]

if you have enough skill to cut it, it will work

[MojaveKing]

if you have enough skill to cut it, it will work
what u mean....to cut it the way i want it....to fit??:confused: :confused:

[quadrcr87]

in the dk mag it says cut to fit number backgrounds. you arent gonna put the whole sheet on are you?

[MojaveKing]

like....in that pic of my Mojave I posted......cut to fit in there......would they stick like stickerS?

[quadrcr87]

yes they stick like stickers and just cut your design from the sheet with a knife

[MojaveKing]

k...i have to wait till tuesday to see what color