help twisted bolt off

[mxrdr]

i need some help i twisted off the bolt in the sub frame now there is no head{where the socket wrench would grip} how do i get it out , is there any sujestions what should i do. pleae help:(

drill a hole in it and use an E-Z out

[WalshKFX]

i use a needle nose vise grip plier or reg. vise grip plier.put it on the tip of the bolt and makes sure it is very very tight on the tip. then just turn to go which evryway u wanna go usually left cuz u want it out cuz its broke. hope this helps u out

[Rip_Tear]

Originally posted by nacsracer27
drill a hole in it and use an E-Z out

This is one of the best, and easiest ways, if there is nothing left to grab on to. Just make sure you drill the hole squard and true, you don't want to have to rethread the hole too.

[muff]

Originally posted by Rip_Tear
This is one of the best, and easiest ways, if there is nothing left to grab on to. Just make sure you drill the hole squard and true, you don't want to have to rethread the hole too.

thats exactly what you want to do

[suck my pipe]

You could just start another bolt in from the other side of the subframe and usw that bolt to slowly twist the other bolt out as if it were one long bolt.:devil: