PDA

View Full Version : toe in or out????


slow4ex
06-17-2003, 03:24 PM
i own a 400ex, 01, and it looks like it is toed out. is it suppose to be or is it a matter of opinion? what does the toe do anyway?
thanks for the help
andy
batgeek
06-17-2003, 03:51 PM
toe camel!
JOEX
06-17-2003, 03:55 PM
Factory toe-in is 15-17mm (.6-.7 in)
If yours are toed-out i'm guessing one or both tie rods are bent. A relatively inexpensive fix, I think they are $5-6 at Service Honda. Buy a few if you can, i've bent three so far:rolleyes:

Joe
QuadTrix6
06-18-2003, 04:06 AM
yea you want toe in
300exTJjeeper
06-18-2003, 05:54 AM
hell ya you never want toe out NEVER
06-18-2003, 02:05 PM
I have my caster and camber at 0. and 0.
QuadTrix6
06-19-2003, 12:07 AM
Originally posted by Racer101
I have my caster and camber at 0. and 0.


how come?
quadrcr87
06-19-2003, 08:52 AM
how much toe in?
06-19-2003, 08:54 AM
I run 3/8 inch toe in, stock caster and about negative 3 degrees camber.
L.Vegas400
06-19-2003, 10:57 AM
Originally posted by 300exTJjeeper
hell ya you never want toe out NEVER
that means the seam is spitting the twins:confused2
06-19-2003, 10:59 AM
Originally posted by L.Vegas400
that means the seam is spitting the twins:confused2
06-19-2003, 11:30 AM
the ex is suppose to have half inch of toe in on each side
slow4ex
06-22-2003, 09:11 AM
thanks for the help!!!!
will fix right away!
andy