PDA

View Full Version : K&N jet kit


Diedrich
06-12-2003, 04:27 PM
what size jets are used in the stage 2 k&n jet kit? my dad put them in so i didnt see em and i dont know too much about jets..thanks
Diedrich
06-12-2003, 05:30 PM
come on sumone has to know
GNCC#829
06-13-2003, 05:33 AM
What do you mean "what size?" There were about 10 different jets in my jet kit. I am pretty sure that they are dynojet jets.
Diedrich
06-13-2003, 07:17 AM
yeah i know theres alot of jets but they tell you which ones goes in the stage 2 kit...my jetting is off sumwhere cause my quad cuts out at about 3/4 throttle so i need to figure out what jets i need
GNCC#829
06-13-2003, 07:20 AM
Depending on your mods, YOU have to decide what jet is right for you. You do know that the stage 2 is for no airbox lid?? When I jetted mine with the K&N kit, the suggestion that they gave me was right on, I just don't remember what the suggestion was now.:(
gojk
06-13-2003, 08:53 AM
What they suggested for me what quite a bit rich. Try pulling they jet and see what was put in then go down one jet at a time till the studdering goes.
Diedrich
06-13-2003, 11:28 AM
the main jet? i think ima ask DMC what jet they recommend with their pipe and go from there
Diedrich
06-13-2003, 11:28 AM
wheres a good place to buy jets?
badass300ex
06-13-2003, 01:21 PM
For your setup you should put in a 128 that comes with the kit with no air box. The settings in the direction are a little lean so richen it up. and you should be fine.