skidplate and rubber?

[Scott-300ex]

i should get my PRM bottom frame plate today and i have heard of people putting some type of rubber or something in between the skidplate and the frame, should i do this, and if so what kind of material is it?

i just figured as long as it is tight it will be fine but this is not a bad idea



:ermm:

[WalshKFX]

i took and cut a old map flap and used weatherstripping adhesive on my skid and it doesnt rattle any more its def. a good idea

[Scott-300ex]

thanks man, i'll probably do somethin like that

anybody else got any other suggestions?

[killed300ex]

definitly use something because it will rub the paint right off the frame i have a black frame so i took some black ship gaurd paint and sprayed my entire top of the skid with it and the bottom of the frame and it seems to be protecting it pretty good and isnt really that obvious that i used something else to paint the bottom of my frame
killed

["BLAHH"300!!]

.."Skid plate & Rubber"..:o

2 things i never want to us at the Same Time. :blah:

[Stevie-D]

uh...maybe im missin something here...i got a PRM skidplate also, and...uh...if you dont want it to rattle, why not just tighten down the nuts real tight and use some loktite?:confused: :huh

[RIjon]

mine Vibrates like MAD under throttle

I am gonna slap some Heater hole on specific Frame rails and crank it back on

super annoying

(yes I tightened the clamps down but it still vibrates)

[QuadTrix6]

real men run it with no rubber :devil: i had to cut ntches to fit my zerks though but it works great, i got mine from a member on this site for free, don't ask how he was just a really nice guy all i hadto do was pay shipping :D

[hondamxer161]

a friend of mine used some handgrips cut up between his skid and frame...

mike

[kicken250x]

i went to a pet store that sold stuff to do fish ponds and found this huge role of foam and i asked them if they could cut me off a piece i payed 2 bucks for enough to to the whole under side of my quad and then some! take and cut it to the outside of your frame rails and then put your skid on and it smashes the foam inbetween the rails and the skid. it also covers the whole skid so mud and other things cant get stuck under it. it works great! you should try it!

[Scott-300ex]

thanks guys:)