Help My bars keep on moving!!!!!!!!!

[300exTJjeeper]

ok here we go. My cheap o Fly bars on my houser stem like move around.
When ever I jump and then land my bars fly forward a couple inches. And I have tighten them down to where there is no space between the clamps.

I was wondering if I can shave off a little metal on the clamps to get some space to tighten them down again or maybe just get another set of bars.

Thanks for any replies

["BLAHH"300!!]

just an idea, before you cut.
..put a piece of thin metal bend it and bolt it down.

[300exTJjeeper]

where do i put the thin metal at. How about a coke can will that be thin enough.
But where does it go??

["BLAHH"300!!]

My bad, i was so rudly interupted.


I don't know that this will work man, but you can try it.
..coke can might work, maybe try something thicker if it doesn't.

cut it the same width as you bar clamp, might put one on both top and bottom. bend it so it fits in the "C" of the clamp.
blot your bar's on as usual.
..little afro engineering there, piece of rubber might work too...

[killed300ex]

i would use a peice of rubber and just wrap it around the bars were the bar clamp mounts to it this will act as a spaceer yet the rubber will grip to both the clamp and the bars not letting it move.
killed

[300exTJjeeper]

sweet deal,

Thanks guys for the info