PDA

View Full Version : Want to xc What need to be done to my bike?



naxbansheekid11
05-31-2003, 05:25 PM
As u all know I had no luck selling my 410cc banshee! Dad is making me keep it so i`m gonna set it up for xc what all do i have to change?And do any of u guys know if anyone is looking for mx banshee parts?

Here is my mods

1997 Yamaha Banshee
Trinity 410 cc motor
20mm Pro Design coolhead
Kehien 34 mm 2into1 carb
New pro circuit pipes also have Trinity pipes...
Completely Brand new bottem end + all gears
New yellow race plastics-Front and Rear
New Black ceet flames graphics
Also have purple plastics
Almost new ac Black nerf bars
Razr front and rear tires
190 Itp rims front and rear
Pro Design dead man switch
Motion pro turbo twist throttle
Brand new +2+1American Star a -arms
White Brothers Racing suspension w/ ressies in front
Lone Star +1 swingarm
Works Rear shock w/ ressie
Lone Star +4 axle w/ radlock
Jaws front bumper also have a dg bumper
P.E.P. Steering Stabilizer
AC full body skids
Frame has been gusted silver
renthal bars
new amp link
new sprockets&chain

naxbansheekid11
05-31-2003, 05:40 PM
come on guys help me out!

batgeek
05-31-2003, 05:53 PM
looks like ya might be a little wide for XC. you might be able to shorten the width up front with 4+1 rims. yer definitely gonna have to go with a less wide rear axle.

if yer razrs are MX sized ya would like to look into 20" rears with 21/22" fronts or 22" rears with 23" fronts.

re-valve and re-spring yer shocks for XC.

pretty much yer set up will work for XC cept for the width.

naxbansheekid11
05-31-2003, 05:59 PM
Ok what about +1 a-arms and what saize axle will i need?also i was think a bigger tank and the 2into 1 pipe i also have beadlocks

thax alot batgeek

cheetah
06-01-2003, 03:32 AM
You'll definately need a bigger tank for it. Judging by your mods, I would say you get a whole 45 min. if your lucky on a tank of gas.

MEL
06-01-2003, 03:51 AM
you posted that you have two different pipes. i'd run which ever gives you the most low-mid range. you'll diffently need to get your quad closer to stock width. either + 1 a arms with 4-1 front rims or put your stock a arms back on. same goes for the rear axle. and you'll want to put a larger gas tank on or you might have to stop for gas on every lap.

MojaveKing
06-01-2003, 04:00 AM
do u guys use...nerf bars for XC/GNCC racing??
.....thanks