edelbrock carb

[maxoutput]

for those who carbs are not returning back to idle ask them to send you STRONGER return spring..seams to have fixed my problem...:macho

[JustRace]

I don't know if any of you people that are having problems with the throttle sticking have twist throttles or not, but heres a little info. My cousin rolled my EX and then my throttle was sticking. I looked all over the cab and couldn't find anything wrong. Well i decided it had to be in the twist part of the throttle. I took the twist throttle off and slid it down the handle bars a little. That fixed the problem. What was happening is that the twist part was getting friction at the end of the bars making it stick.

[PHIL_B54]

max, i pm'ed you, but which spring the one hooked to the slide on the inside of the carb or the one on the shaft on the outside?

i hope that fixes it

and nope, i got thumb throttle

[maxoutput]

the return spring on throttle shaft

[PHIL_B54]

i called them up today, and he didnt sound too excited about giving the springs to me, but he said he would send them anyway

he said out of over 1500 400ex carbs out there, the sticking problem we are having has only showed up in like 5 or 6 of them and it so happens that 2-3 of them are exriders members

[quadracer247]

my throttle sticks now on my 440. i tried to call edelbrock today and didnt get them so ill call them up again tomorrow