Before & After

[RIjon]

Before

http://members.cox.net/jfast50/quad/Quad06.jpg
http://members.cox.net/jfast50/quad/Quad07.jpg

after

http://members.cox.net/jfast50/quad/Quad22.jpg
http://members.cox.net/jfast50/quad/Quad24.jpg

She is 4" wider with Tripple Rate Springs w/rezzies

Still have to put on the pipe,jet kit,UNI filter, and new Bumper:)

[RuffRyder400ex]

looks good

[Nausty]

looks really good, you know you can polish the throttle cover? The shock rezzies would look really good polished up too if you can polish them.

[416exmx]

thats cool.

here is my before and after.

before

[416exmx]

here it is after some powder, shocks, aarms, wheels, hood and other stuff.

after

[RIjon]

Nice!

That thing's sick

I definatly an not trying to compete with you guys

I have only owned this quad for abo0t 2 months and it's my first one at that ;)

Is there anywhere that sells the Rubber spacers that go between the rezzies and the frame ?? (mine are shot)

I also have to mess with the alignment

Thanks for the props ........

[416exmx]

i have some of thoes rubber deals from when i had the tcs. if i can find them you can have them and they were even in good cond.

[RIjon]

Thanks for the offer

I think I have the answer though

As far as polishing this and that..... I really don't care much for the Bling bling stuff

More of Form Follows Function :p

[400exBro]

Originally posted by 416exmx
here it is after some powder, shocks, aarms, wheels, hood and other stuff.

after

DDDDDDDDDDDDAAAAAAAAAAAAAAAAMMMMMMMMMMMNNNNNNNNNNN

that is one of the nicest 400ex's i have seen, i wish mine would looks like that:( .......

[stocktires]

both are very nice quads!
You can get some of the rubber front rezzy holders from LRD. They're made by U.P.P.

[AlaskaSpeed]

before you know it, you'll have that money pit decked out.....lol.........here is my before:

[AlaskaSpeed]

and many dollars after:;)

[AlaskaSpeed]

and after again......:

[RoadkillerRyan]

hey Alaskaspeed
I dont really see a change:rolleyes:




















hah just kiddin looks like a whole different quad

[AlaskaSpeed]

Originally posted by RoadkillerRyan
hey Alaskaspeed
I dont really see a change:rolleyes:




















hah just kiddin looks like a whole different quad

If I showed you my checkbook balance AFTER............you would notice a change.....that is about all that is left....change.........:blah:

[R'Fanatic]

RIjon, Nice bike man. How many times you ridden it since the upgrades? Are the Arens nerfbars hard to mount up?

[RIjon]

Haven't really riden it yet ....tomorrow is the day :D

I just got done adding the HOMEMADE Neoprene Shock Wares , Rezzie Wares , & Handlebar Pad Wrap (didn't like the Renthal one)

Also Added the WB E-series Slip-on , UNI filter, & Jetted it !!!

http://members.cox.net/jfast50/quad/Quad27.jpg
http://members.cox.net/jfast50/quad/Quad28.jpg
http://members.cox.net/jfast50/quad/Quad29.jpg

WHAT A Difference from Stock :eek2:

[sweet300ex]

Originally posted by RIjon
WHAT A Difference from Stock :eek2:
yeah I know what ya mean, White Brothers makes nice pipes

[RIjon]

I was refering to all of the mods together making it such a different quad

Was Spost to go riding today , but ofcourse ..... IT's FO0KIN RAINING :mad:

Oh, the Arens Nerfs where a Breeze to install , no problems at all ;)

The stock heal guards were a bit of a pita though

[400exBro]

416exmx- can you post a pick of your groved tammers ?? i am thinking about doing it the same way, i just need a different angle...

thanks

[416exmx]

here is how i grooved my 18x11x8 tammers

-start where three knobs are in the center of the tire, the cut next two on each edge of the three.
-leave a full row
-the next row will have three in the center again, cut them
-leave a row...and so on and so on
-you end up with an odd number of rows so i just cut every other knobb on that row then alined that row up evenly on each tire so it dont pull funny.

[400exBro]

Originally posted by 416exmx
here is how i grooved my 18x11x8 tammers

-start where three knobs are in the center of the tire, the cut next two on each edge of the three.
-leave a full row
-the next row will have three in the center again, cut them
-leave a row...and so on and so on
-you end up with an odd number of rows so i just cut every other knobb on that row then alined that row up evenly on each tire so it dont pull funny.

i am kinda of lost on the your first 3 points, i will probably figure it out once i look at my 18x11x8's...
but i understand that

1) look for the row that has 3 in the middle and cut them
2) leave a row
3) cut 2 on the outside, (on both sides)
4) leave a row
5) cut the 3 in the middle
6) leave a row
and so on??
i am kind of slow right now i just finished some huge history assingmnet and a english assignment... you might have to clarify it a little better, but i think i see what you mean