"BLAHH"300!!
05-29-2003, 07:25 PM
hey.
..i've had my bike for 2 years, and i've never had rear brakes.
i finally got a p-brake block, and it fixed the problem.(1 of em')
..the previouse owner took everything off, but he lost all the bolts.
i need to know what i'm missing, if anything. i also need a few bolts.
..what holds the leaver to the pivot bolt?
does it just slide on there and stay, or is
there a clip that goes on after it, to keep it in place?
..on the stock swingarm, there are 2 bolt hole's, on the top right side, what goes in these holes?
..are there any "loose" brakets to hold the line's to the arm?
..(loose as in..can be removed)
....a nice close up of a stock 300ex swingarm, with brakes, would help me out alot..
..i mounted everything today,
well, i just kinda "stuck it all up there" with misc..bolts and nuts...and the lines are look all outa wack...they look like there in the wrong place....
...if you have any extra bolts, PLEASE reply, or pm me.or e-mail..
..i need...
2..bolts..to mount caliper to the plate on the axel
2 bolts..to mount p-brake to the caliper
1..rear brake re..(mine melted, and bowed, it's not air tight)
..any type of "loose" braketts that i'm missing..
..a clip for the pivot bolt (if there is one)
...i have all the majore parts, rotor/lines/leaver/master cyl/and rotor bolts&nuts
also, what type on "line" do you guys use to run from the bleader screw to the resivoir, or brake fluid bottle?..(for bleeding)
i've been using a fish tank air line..heated up, and "streached" over the screwhead..but it keeps poping off....(TIPS?)
SORRY SO LONG
..i've had my bike for 2 years, and i've never had rear brakes.
i finally got a p-brake block, and it fixed the problem.(1 of em')
..the previouse owner took everything off, but he lost all the bolts.
i need to know what i'm missing, if anything. i also need a few bolts.
..what holds the leaver to the pivot bolt?
does it just slide on there and stay, or is
there a clip that goes on after it, to keep it in place?
..on the stock swingarm, there are 2 bolt hole's, on the top right side, what goes in these holes?
..are there any "loose" brakets to hold the line's to the arm?
..(loose as in..can be removed)
....a nice close up of a stock 300ex swingarm, with brakes, would help me out alot..
..i mounted everything today,
well, i just kinda "stuck it all up there" with misc..bolts and nuts...and the lines are look all outa wack...they look like there in the wrong place....
...if you have any extra bolts, PLEASE reply, or pm me.or e-mail..
..i need...
2..bolts..to mount caliper to the plate on the axel
2 bolts..to mount p-brake to the caliper
1..rear brake re..(mine melted, and bowed, it's not air tight)
..any type of "loose" braketts that i'm missing..
..a clip for the pivot bolt (if there is one)
...i have all the majore parts, rotor/lines/leaver/master cyl/and rotor bolts&nuts
also, what type on "line" do you guys use to run from the bleader screw to the resivoir, or brake fluid bottle?..(for bleeding)
i've been using a fish tank air line..heated up, and "streached" over the screwhead..but it keeps poping off....(TIPS?)
SORRY SO LONG