pro design cool head

[MILF_HUNTER]

im planin on pickin up a cool head for my 250r and im wonderin if i should get the standard one less or buy the one with the o-ring and head stay. what is the difference. what kind of applications would either be used for. im buying one so i dont have to run race gas in my motor anymore. my motor is a 86 with a spacer plate/long rod with a lrd cylinder

[methyman]

I have this head on my bike and it is awsume. I switched from a pro design to RK Tech head and my bike rips. Call them and speak to Kelsy, hes a great guy. He designs a head that uses O-rings instead of a head gasket which is alot better and the price is around the same as for a cool head and he custom makes your dome to your riding needs and fuel.

RK Tek
2441 N. Main #5
Sunset, Utah 84015
801-774-7331
801-774-7329 (FAX)

His web site
http://www.2strokeheads.com/2-stroke-aftermarket-heads.html


Later

Matthew

[twisted threads]

Get the O-ring head! You will save $ in the long run from all the head gaskets that you dont half to buy. :cool: If you have an O ring head you can mess with the domes all you want.