View Full Version : Drag Racin a R???
ride red
05-29-2003, 08:46 AM
I'm goin out this weekend to buy a 87 250R and am gonna drag race it around my area. I want a good setup to win. It is port and polished by CT racing and has a 89 rod in it. I'm gonna buy a pipe I think a ESR..what kind of carb should I go with and how big? Any other suggestions would help......thanks
4TraxRider
05-29-2003, 09:08 AM
I really like Mikuni carbs. I think stock is a 36, correct me if I'm wrong, but try going a mm or 2 larger. It'll give more topend, with the sacrifice of more bottom, but for draggin it doesn't really matter.
wilkin250r
05-29-2003, 09:09 AM
PSI makes a monster 425cc for the 250r, you may want to look into it...
XANDADA
05-29-2003, 09:12 AM
My vote would be 38 or 39 keihin for drag. When you get the ESR pipe ask them, they would know the best for your application. Stock is 34...
ESR250R
05-29-2003, 03:58 PM
ya stock is 34mm. i would suggest a esr trx 11 or ftz pipe. i went to silver lake once and watched a 250r with a ftz pipe on alcohol wax drag shees. the only thing close to him was a ds650 with a NOS bottle strapped to the front bumper.
Originally posted by wilkin250r
PSI makes a monster 425cc for the 250r, you may want to look into it...
Heh...Yea, they do.
Flyin#3-1/2
05-29-2003, 04:29 PM
my LT would waste any 250r.....lmao
flyin#5
05-29-2003, 04:36 PM
that 250r engine is bigger than your lt:eek2: :blah:
ride red
05-30-2003, 08:49 AM
thanks for the advice...I'm payin $4000 for this R...is that to much..thanks
XANDADA
05-30-2003, 08:50 AM
need more info & pics, got anything?
AFTERMARKET
05-30-2003, 12:50 PM
When you get it. Take It home pull it ALL Apart sell it all the parts and build one like mine! :) :) :)
http://www.glamisdunes.com/photopost/data/500/19100-0061_img-med.jpg
markeg192
05-30-2003, 03:50 PM
There's a guy around here that has an R that been ported locally, Has an ESR stroker crank and a drag pipe. It also has had alot of chassis mods to lighten it (supposedly wieghs 280). I've seen it run 79 mph at the local drag strip.
Dune Surfer
05-30-2003, 05:07 PM
Originally posted by AFTERMARKET
When you get it. Take It home pull it ALL Apart sell it all the parts and build one like mine! :) :) :)
http://www.glamisdunes.com/photopost/data/500/19100-0061_img-med.jpg
No Chit, Your bike is killer, brat. I want one that fast:D
sly400ex
06-02-2003, 06:08 AM
Originally posted by AFTERMARKET
When you get it. Take It home pull it ALL Apart sell it all the parts and build one like mine! :) :) :)
http://www.glamisdunes.com/photopost/data/500/19100-0061_img-med.jpg
How's that thing handle on the track or in the woods?:confused: :rolleyes: I'm just being dumb!!!:scary:
AFTERMARKET
06-02-2003, 12:54 PM
Is there is no woods in So Cal so I dont know. And For the Track I changed out the swing arm and pipe. With the Laeger's frame, T Pin front end, and PEP ZPS its the best track bike Around
honda400exrider
06-02-2003, 01:14 PM
DAYYYYYUUUUMMMMMMMMMMMMM!!!!!!!!!!!!!!!!!!
ride red
06-02-2003, 03:14 PM
I think I am gonna go with the ESR 11 pipe. I would like to put a 370 kit in it. Is the ESR also a could one to put it or should I look else were...thanks
310Rduner
06-02-2003, 08:37 PM
AT pismo the last big weekend ( forget what trip it was) ESR stroker 370's with trx11 and the out of frame drag pipes were completely smoking builts shees... it was a complete joke. i had to give my buddy's chit cause they ride banshee's and poke fun cause i only have 1 cylinder hehe .....so seeing the twins get smokes was a fun thing..:rolleyes: :p
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.