torquing bolts down on 400ex

[cals400ex]

i was wondering how many ft/lbs of torque is recommended for the small bolts on top of the head on the 400ex? i have the print out for the torque specs on the 400ex but there is a few things missing. thanks

[luvmyex]

tighten the center bolt(the bigger one) to 17 ft lbs.All the smaller ones just tighten like you would you oil filter bolts.Dont try to tourque them or youll strip em.

[cam400ex]

anyone else know. i'm in the process of tighting my cover up and want to make sure i get it tight so it doesn't fall out later:(

[F-16Guy]

Originally posted by cals400ex
i was wondering how many ft/lbs of torque is recommended for the small bolts on top of the head on the 400ex? i have the print out for the torque specs on the 400ex but there is a few things missing. thanks
8 ft/lb. Use a torque wrench with in/lb graduation, if you have one. Run them all down until they're lightly seated. Torque in a criss-cross pattern at 45 in/lb, and then a final torque to 90 in/lb +/- 5.

where can i get a touqre sheet at? besides a manual?

[300exTJjeeper]

on this website in the tech page