All R owners...need your opinion!!!

[edzbanshee]

Well, I might give up the Shee for a 1987 R. Below is a listing of mods and pictures too. Can you all give me you honest opinion of what you feel this is worth or how much you would be willing to pay?

+2+1 Boss atv CHROME a-arms
bronze a-arms bushings
swing arm bearings-(pivot works)
front wheel bearings-(pivot works)
Herrmann dual row bearing carrier-bearings and seals are new, carrier is 1 year old
d.i.d. x-ring chain
sprocket specialties front sprockets- sizes 12, 13, 14
sunstar rear 39 thooth sprocket
ECA case saver
Galfer stainless brake lines (front)
ESR trx5 pipe and silencer (polished)
honda bars, key switch, dash plate, tail light, toolbox, tool kit, headlight mount, spare headlight lens(new in box)
AC propeg nerfs (used)
22"holeshot XCT rear tires ( 2 rides on them, no plugs)
21" holeshot XC front tires ( over 3/4 tread, no plugs)
10x5 ITP c-series rims on front
10x9 ITP c-series rims on rear
stock gold rims also included, front and rear, rear has 20" holeshot XC's on them, 3/4 tread left
pro design cool head with 21cc dome
pro design powershifter
hinson clutch basket and new shifter shaft(installed 5-10-03)
works triple rate shocks on front- setup for xc, 210 lbs-brand new
chrome lonestar +2+4 adjustable axle (1 year old, straight)
east coast atv graphics kit and seat cover
polished DG bumper
polished DG grab bar
AC full chassis skid plate
DG swingarm skid plate
omf aluminum air scoops
all bolts were sent out and chrome plated
new rear brake caliper (honda)
rebuilt both front calipers (with honda parts), new brake pads
new shockwears (all 3)
fresh top end, .020" over
v-force delta 2 reeds
UNI air filter
WB air box rings
hinson steering stem bushings, new bearings and seals at the bottom also
88 length swingarm, painted silver
fresh powdercoat on frame trans blue over silver, done at east coast atv

polished stator cover

stator, cdi box, and ignition coil are also less than one year old. (new honda parts)

[sly400ex]

5500, give or take........:cool:

[edzbanshee]

one more...

[Wired]

$5500

[edzbanshee]

Any others have their opinion of a good price? Thanks!!

[250r/master3]

looks clean 5500 sounds right

[AFTERMARKET]

No More than 5 Grand

[JHF219]

5500

[joeroadking]

$4500-5000

[UglyMotha™]

i dunno, but i want it

[Sparks425Ex]

I say give him 5000 for it. No More No Less...

[edzbanshee]

Sparks and roadking - What reason(s) can you give for not paying more than $4500- $5000.

He will take $5500 with his wheels on or $5100 without the wheels. I would buy a full set of .190 douglas and razr's (~$400), so the total will come out to $5500 anyway. Do you think I should ask for less than $5100? Has anyone heard of Boss atv a-arms? I haven't...

[250rpilot]

ed, you forgot to tell them that since all this work was done, it has been ridden TWICE. i just dumped tons of money into this quad, and unfortunately, for personal reasons, i must sell. if anybody on here knows me from paatving.com, you will know how much work and money i put into this thing (i have the receipts to prove it).

5500 with rims and tires, or 5100 without, NO LESS! it is what it is.

[JTRtrx250r]

I wouldnt go no less then $5100 if it was mine too,thats a nice unit:eek2:

[joeroadking]

I was by no means saying you should pay $4500-5000 thats what I would pay as you where asking our thoughts look at my sig, I am into the r listed for around $2800 +some labor and would sell it in a minute for $4500. and thats what I am baseing my opionion on,250 r are awesome bikes but the can be had for a bargin if you search around a little at least in the north east:D

[CBW]

I am into this one for some wheres around $14,500 give or take abit..(that doesnt make it a better bike...its just $$ in parts that i wanted on mine)......So in my opnion that is a good deal for $5100.....yeah maybe you can find one cheaper but you may end up with a cheap bike also..........jump on this one. I would if i was were you:D :cool:

[joeroadking]

CBW I agree with you and by no means was saying anthing neg and yes i could see paying $10,000 for one of your smithsonian restored secret workshop 310 rs

[CBW]

Originally posted by joeroadking
CBW I agree with you and by no means was saying anthing neg and yes i could see paying $10,000 for one of your smithsonian restored secret workshop 310 rs


I know you werent .........but i have seen lesser quads than the one he is asking about,,,,,,,,, for about the same or more $$$........

I guess we all have at one time or another:D

Id say its worth it if he wants a quad that is ready to ride.......personally i think the tearing apart of the quad and putting it back together is 50% of the fun factor;) :p

However i did pay 4500 for my 88 and it was not in near as good of condition as the one being asked about.....my 88 was all stock

Something for him to think about maybe:p

[crazybuffalo]

i agree 5500 sounds reasonable

[stocktires]

That R looks to be extremely clean (huge plus), but you must realize its not completely modded out like many R's are. But just getting an R from normal condition, to that condition with some nice mods would take thousands of dollars (I know from experience)!
Definatley worth $5500!

[marksuttonjr]

If I were buying it $4,000-$4,500 because I won't buy anything that isn't a steal. If I were selling it $5,000-$5,500. Thats just my openion. Like I said if it's not a steal I don't buy it, but then I won't sell anything for less than it is worth.

$5,000 is probably a good price for buyer and seller.

[Glow Plug]

man that thing looks sweeett i want it