mickey dunlap

[Chris400extreme]

i hope mickey reads this but does anyone have the number to fst? i cant find where i had it wrote down. i need to find out how much it is to get another cylinder sleeved w/ a 500 kit sleeve and maybe a higher compression piston for the kit that what it came with. thanks. if you read this mickey just pm me the info. thanks

[chad502ex]

Originally posted by Chris400extreme
i hope mickey reads this but does anyone have the number to fst? i cant find where i had it wrote down. i need to find out how much it is to get another cylinder sleeved w/ a 500 kit sleeve and maybe a higher compression piston for the kit that what it came with. thanks. if you read this mickey just pm me the info. thanks

814.842.6159
Chad502EX.com

[bmw500hp]

Chris:

Here is Mickeys Direct e-mail ( mdunlap@bedford.net )

[SpeedBump]

Hey, were you and a buddy at the last Beaverdale hillclimb? If it was you, does your machine have the stock swinger or the one with the extended?

[chad502ex]

Originally posted by SpeedBump
Hey, were you and a buddy at the last Beaverdale hillclimb? If it was you, does your machine have the stock swinger or the one with the extended?

Yes, we were there and tried that incredible climb for the first time. His 508EX (with extended swingarm) was not dialed in a did not cross the light. My 502EX, with stock swingarm and 22" mud tires, stock gearing did cross the lights and place 2nd. Not bad for my first time, huh?

Chad502ex.com

[SpeedBump]

Yes, not bad for a 1st attempt. The guy riding the 440EX with the extended swinger (my buddy Matt) is only one a few guys who actually top the hill with a 4 stroke. I believe a guy made it last year one time on a Raptor. Other than that, I don't believe any other 4 strokes have made it over the top. I have yet to try it. I am almost sure I will not make it over. I wanna wait till I get my new swing-arm done (+4") Are you coming to the next one on June 1st? If you do, leave the big mud tires at home. Bring a new set of Ohtsu Radials. The best tire for that hill. Guaranteed. Anyway, here is a pic I took of you ( I think this is you) in the pit, gettin ready for the climb.

[chad502ex]

Originally posted by SpeedBump
Yes, not bad for a 1st attempt. The guy riding the 440EX with the extended swinger (my buddy Matt) is only one a few guys who actually top the hill with a 4 stroke. I believe a guy made it last year one time on a Raptor. Other than that, I don't believe any other 4 strokes have made it over the top. I have yet to try it. I am almost sure I will not make it over. I wanna wait till I get my new swing-arm done (+4") Are you coming to the next one on June 1st? If you do, leave the big mud tires at home. Bring a new set of Ohtsu Radials. The best tire for that hill. Guaranteed. Anyway, here is a pic I took of you ( I think this is you) in the pit, gettin ready for the climb.

Thx for the awesome picture upload, I'll put it in my digital archive, heh!! Anyway, yes next time I'll be better prepared for the climb. I'll have stock sneakers on the rear which should help big time!! Also stock rear should lower my gearing a little since I was running 15/38 with 22" and still hit the light at top. Matt is really impressive climbing that hill. You can tell he has done it many times!!

Check this picture out, my friend emailed it too me, heh!!

Chad502EX.com

[SpeedBump]

Yes Matt is good at it. Just wait till ya see his newest project......Honda CBR600F2 engine in a TRX250X chassis. He has it....ahh.....1/2 done. Says it should be finished in time for the "Thunder In The Valley" climb. (June 29th) I will try to get over to his house this weekend and snap a couple pics of it. Here is a pic of your buddy.

[SpeedBump]

Here is an action shot of ya.

[SpeedBump]

I think this is you hittin the light at the top.

[Chef]

Is that the climb on Huevos 3?

[SpeedBump]

This should make your buddy feel proud!!!! That is him gettin a TUG and TOW over the top :macho :devil
Make sure to rub it in, I bet he would if It was you!!!!! :blah LMAO

[SpeedBump]

I believe it is. Other's have said it is. I haven't seen the movie, but it IS impressive in person. ALOT harder than it seems to look.

[chad502ex]

Originally posted by Chris400extreme
i hope mickey reads this but does anyone have the number to fst? i cant find where i had it wrote down. i need to find out how much it is to get another cylinder sleeved w/ a 500 kit sleeve and maybe a higher compression piston for the kit that what it came with. thanks. if you read this mickey just pm me the info. thanks

Hey Chris, did you ever get in touch with FST? Do you currently run a FST500?

Chad502EX.com

[ChadEXer]

Chris,
How ya been man? Is your bike still running well? Mine is still doing great. Got it dialed in perfectly on alky and all my other things finished up. Placed 1st at the Memorial Day drags this weekend in the 400cc class and the 600+cc class. Took home a pot of $500 so it turned out pretty well!!

[TURBO-530R]

hey speed bump , do you have the pic's from last sunday climb as i smoked the hill and brought home first place ?

matt said that was the first time he has been beat in two years.

that is a good win record two years!

[SpeedBump]

By the way, GREAT JOB!!! The hill was brutal Sunday. Here are a few pics, I will save your "Moment in the SpotLight" for last......Here is the Defending Champion(Matt) lookin good toppin' the breaker....but......

[SpeedBump]

Here he is gettin' some much needed help. He had trouble keepin' the front end down and had to shut down. The quad started rollin backwards, he bailed and tried runnin' with it to slow it down 'till the guys grabbed it. He sprained his ankle pretty bad, saw him today where he works, LIMPIN' 'round.

[SpeedBump]

Here is the bike before the climbs in the pits.

[SpeedBump]

view

[SpeedBump]

before runs

[SpeedBump]

Nervous????????? I bet, I would be. This was taken from on top of the breaker.....after they get past me here, they STILL have over 150 Feet to go to the top!!!! :macho

[SpeedBump]

:macho :macho :macho Who got big ba.... ahh.....horsepower?

[SpeedBump]

Well, here is a better picture to show more what it actually looks like. This was taken from the same place as the pic of him in the staging pit, but lookin up from the breaker, instead of down. MEAN MO-FO!!!

[TURBO-530R]

thanks for the kewl pics if you have any more you can e mail them to me james341@aol.com