250ex Help

[250EXking]

my 250ex is getting worked in good. i just took all the fron bushings on the a-arms and greased them and the shocks and everything, changing the oil, cleaning the air filter, all basic. but it is getting older and time for more then the basics. anything i need to grease that needs to be or anything i have to change. it'll be 2 years old in october. so i was wander if any joints or bolts need to be checked. thanx

[250rAL]

I'm not familiar with this machine specifically, but one thing that needs looking after on most machines is the swingarm pivot bolt. Take it out and grease it. The bearings/spacers tend to seize to the bolt making it a nightmare to get it apart later and replace the bearings.