Need brake help

[Stock 400 rider]

Hey I done almost everything i could do to make my front brakes better, and they are so bad, stoping my quad only if i put lot of streight in it.

what can i do with this brakes?

[JOEX]

Have you replaced the pads?

Joe

[sly400ex]

Steel braided brakelines will help you out too!;)

[Stock 400 rider]

Yes I replaced the pads and done that too sly400ex

I done a test too with the brake lines and they are ok

Don't know what it is!!!

[JOEX]

I'm guessing there is a little bit of air in the lines. Maybe replace the fluid?

Joe

[brazilian rider]

Done that too!!I even replaced the master cilinder of the lever

[sly400ex]

Maybe your calipers are bad:confused: Something is definately wrong though, 400ex fronts are very strong!

[KY Woods Rider]

Since everyone else has already covered the mechanical parts, I can only think of one other possibility... something oily on the rotors or pads. Have you cleaned the pads and rotors with any type of brake cleaner/degreaser to make sure they don't have anything slick on them? I'm thinking that surely you've tried that already, but sometimes it's the simple things that will get you:D

[Stock 400 rider]

thanks ky wood rider I'll try do to that but I think it has something to do with the rotors, I think they are bent