Clutch Spring Torque specs ASAP please!!!!!!!!

[400MXer]

I'm putting my clutch back together and i can't remember the torque spec, and i don't really feel like just winging it and it possibley coming loose. do any of you know or have a book???

[funluckey]

The book says, "Tighten the bolts in a crisscross pattern in several steps."(pg. 9-10) it does not give a specific on the clutch springs.
The only value it gives ...

Clutch center lock nut 80lbf-ft

[swamprider7]

Just tighten them until they are tight. The spring pressure will keep them from loosening up.

[Castor-426ex]

dont go too far...i did and broke a bolt....ended up costing me a new center and all new bolts and a hassle

[Dirt]

Torque Spec = Tight but not too tight...

[44oEX]

just go till the bolts hit bottom and go half a turn after. when you do it you will know what I mean

[anywhereEx]

LISTEN to them... If not you will be pissed cause if you overtigten them you will break the inner hun easily....


Castor-426ex dont go too far...i did and broke a bolt....ended up costing me a new center and all new bolts and a hassle

cause that will cost you time and money... Been there it sucks

[RiPPiNiTuP7]

Just snug em' up.

tighten them to wrist specs

[AtvMxRider]

Originally posted by swamprider7
Just tighten them until they are tight. The spring pressure will keep them from loosening up.

What he said. Just tightened them hand tight.