Str8Wicked
05-08-2003, 04:39 AM
OK I got the LSR A-arms on last night the right way, also installed the chrome tie rods, hobs, brakes, etc to get it ready to put the tires on and get it dialed in. One question, I'm putting on my works shocks and the bottom of the shock is too large to fit in the lower A-arm.
Should I:
1. Bend the A-arm using a rubber mallet to widen the shock mounting on the lower A-arm
2. Grind the metal on the shock, so it is not that wide and will fit into the lower A-arm. (I believe the direction that came with the work shocks said do not do this thou)
3. Sit there, look at it all night long while I drink more and more beer until I'm so drunk I really don't care.
let me know guys...
Should I:
1. Bend the A-arm using a rubber mallet to widen the shock mounting on the lower A-arm
2. Grind the metal on the shock, so it is not that wide and will fit into the lower A-arm. (I believe the direction that came with the work shocks said do not do this thou)
3. Sit there, look at it all night long while I drink more and more beer until I'm so drunk I really don't care.
let me know guys...