HELP!!! Need to buy sprokets and chain but don't know....

[250x#93]

The stock gearing for a 250x is 13f and 38r, So I'm gonna up the front sproket by one so it'll be 14-38 but I'm going to buy a chain to and don't know what length to buy???????????? Can someone please help??????????:confused:

[250x#93]

Do ya think I could use 15 tooth, that will gain me top end right, so which should I get a 14 or 15. I need help:(

[250x#93]

Bump
I gonna order these tonight, just don't know what to get??????????????????????????????:confused:

[nacs400ex]

well it depends what kind of riding you do, if you do MX I would say get some bottom end, if you do trails well its kinda half and half. If it was me I would get the 14 tooth, because I like bottom end power, in the trails your not gunna be going top speed, bu then again my 300ex wasnt too fast. Hmm well its a toss up, personal preference. What size of tires do you have ?

[250x#93]

20 shredders:)

[250x#93]

How u know what size chain to get?

[Tommy 17]

if i were u i wouldn't go above teh 14t brandon... a 15t would be way to hgih of gearing for u... 14 mayb to high of a gearing yet alone a 15t...

go out to ur quad and count the number of links in the chain and order that same length mayb 2 links longer if u get the 14t over the 13t... u can always cut the chain down but u can't order a longer one...

if someone wiht a 250x would reply... i'm not sure on the length of the 250x chain or i'd tell u exactly what it is...

[quader400]

if i were you i would go with the 14 and the stock lenght i would think would fit because its adjustable so i would think but im not 100 percent sure

[250x#93]

bumper up

[quadrcr87]

i think the rocky mountain catolog has chain length maybe their websitee? i think its 86 links?

[250x#93]

bump

[ACracin300ex]

i bought a 15 tooth for my 300ex, with a 520x ring atv chain, 86 links. It rubbed on the case, so i had to go to a 14 tooth, and i have to check the tension every few hours, to make sure it didnt loosen up, and hit my case. With the 14 tooth, i can feel a top end difference with the 38 tooth sproket, but i also have a 36 and a 34. With the 14-34 and 18" tires, it really moves. For trails i run a 14-36 with 20 inch tires. hope this helps.

[250x#93]

thanks guys for the info, but now i think i'll stick wit the 13-38 since i'm sellin it too. I don't wanna spend that much money on it since I sellin it:devil Thanks for the info though guys