rear razr tire pressure?

[2k2-300exnj]

what is the reccomended rear razr tire pressure for 22x11x9 6 ply and what do you guys run i ride fast trails and some mud

[WB400ex]

try about 1000 k of air which is about 12 psi(yeah right) and see what happens to the rubber. (just a hint: i think its going to pop)

[beerock]

those tires wont pop with 60psi in them

the pressure in the tire is your preference I would recommend 4 psi

[WB400ex]

well put 200psi in them and watch that rubber stretch or pop. LOL

My freind runs 2psi, i would run 3 myself though

[SGA]

Bout 3-5 pounds. 3-4 gives a little better traction. 4-5 keeps the tires seated to the rims better if you corner hard but slides a little more. I run about 4-5 pounds

[ShiftFMX]

I use about 4.3 psi in my razrs

[quadfamily]

I have 20X11X8's on my 300EX with stock fronts. When I first put them on I ran 4-5 psi but I had a major problem with the quad pushing in turns. The tires at this pressure had too much traction and wouldn't break loose in a turn to allow me to turn, it was pretty scary. Maybe it was because they were new and the knobs still had sharp edges or maybe it was the pressure? I raised the pressure to 7psi and had no more problems. I love them now and for what it's worth I just ordered Razr MX fronts. I just got my son new Razrs for front and back on his 250X. We put them all on and he hasn't really had a chance to ride with them except for a quick test ride at 11:00 last night. The thing really turns, I can tell you that! Good luck.

I run 3 pounds in mine.:macho

[RideRed04]

Originally posted by Killa250ex
I use about 4.3 psi in my razrs

About?

[300exrider99]

I run 7psi in mine it makes it a lot easier to slide.