View Full Version : rear razr tire pressure?
2k2-300exnj
12-28-2001, 10:59 AM
what is the reccomended rear razr tire pressure for 22x11x9 6 ply and what do you guys run i ride fast trails and some mud
WB400ex
12-28-2001, 05:05 PM
try about 1000 k of air which is about 12 psi(yeah right) and see what happens to the rubber. (just a hint: i think its going to pop)
beerock
12-28-2001, 05:23 PM
those tires wont pop with 60psi in them
the pressure in the tire is your preference I would recommend 4 psi
WB400ex
12-28-2001, 06:18 PM
well put 200psi in them and watch that rubber stretch or pop. LOL
My freind runs 2psi, i would run 3 myself though
Bout 3-5 pounds. 3-4 gives a little better traction. 4-5 keeps the tires seated to the rims better if you corner hard but slides a little more. I run about 4-5 pounds
ShiftFMX
12-29-2001, 12:08 PM
I use about 4.3 psi in my razrs
quadfamily
12-30-2001, 09:17 AM
I have 20X11X8's on my 300EX with stock fronts. When I first put them on I ran 4-5 psi but I had a major problem with the quad pushing in turns. The tires at this pressure had too much traction and wouldn't break loose in a turn to allow me to turn, it was pretty scary. Maybe it was because they were new and the knobs still had sharp edges or maybe it was the pressure? I raised the pressure to 7psi and had no more problems. I love them now and for what it's worth I just ordered Razr MX fronts. I just got my son new Razrs for front and back on his 250X. We put them all on and he hasn't really had a chance to ride with them except for a quick test ride at 11:00 last night. The thing really turns, I can tell you that! Good luck.
I run 3 pounds in mine.:macho
RideRed04
12-30-2001, 08:04 PM
Originally posted by Killa250ex
I use about 4.3 psi in my razrs
About?
300exrider99
12-31-2001, 12:31 AM
I run 7psi in mine it makes it a lot easier to slide.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.