PDA

View Full Version : Jetting Guide.......................... Contribute HERE!



ROGERS
05-04-2003, 03:12 PM
I was thinking that it might be easier for people who are wondering what jets to use on their bikes, if we had a thread that covered which jets for some popular mods for your altitude.

Post basic mods & popular setups/kits and what coresponding jets are required. Also if anyone knows a good rule of thumb for altitude adjustment, let's have that too.

Example:
1. WB slip-on only = ?main jet.......this should cover most disc type cans, like fmf etc.

2. R4 slip-on only= ?main jet........this should be close for most straight through cans.

3. 416 piston, cam, and full system= ? main jet. ? idle jet

etc.........

This way we don't have a zillion different threads and anyone can do a search and find out what they need without having to wait for a response.

Good Idea?

KASCHAK
05-04-2003, 03:18 PM
sounds like a good idea i didnt do my jetting yet but i do need help so everyone start posting so i can get some help with out being yelled at :rolleyes: hahaha jk

cheetah
05-04-2003, 03:56 PM
It's a great idea, but everyone's bike is going to run differently. Anyways my WB E-series full system used a 155 main jet. That might be a place to start, then go up or down from there.

trailburner
05-04-2003, 04:05 PM
great idea!!!!
White bro's slip on, 12 discs = 160 main[summer] 165 [winter]...
[being safe on the rich side]....;)

Narly R
05-04-2003, 04:10 PM
Well this is kinda my fault I hade a jetting question! But good idea!!!:D

Texan32
05-04-2003, 04:37 PM
DMC "Alien" system, K&N w/ outerware, 165 main, 42 pilot (1 3/4 turns)