I finally ordered my new plastic...

[QuadJunkies]

I finally ordered my new plastic today plus a few other goodies for the Predator... So tell me , how big of a pain is the maier plastic to put on the 400ex?

[CHAUNCY]

What color you order ? I heard its easy and hard to put it on from different people. But I have never put Maier on a 400 I just got stock plastic again:blah

[QuadJunkies]

Originally posted by CHAUNCY
What color you order ? I heard its easy and hard to put it on from different people. But I have never put Maier on a 400 I just got stock plastic again:blah I got silver.:blah next week I go in and have my graphics custom made...:D

[CowsBitePeople]

Cool i think im gettin silver maiers for my 400 soon....Post some pics when you get them on....

MaTT....

[CHAUNCY]

Sounds good

[nacs400ex]

Maier plastic was really easy for me to put on. I just have little brackets for the fenders. The hardest part is just switching the lights over. I did put them in, but then took them out.

[QuadJunkies]

Originally posted by nacs400ex
Maier plastic was really easy for me to put on. I just have little brackets for the fenders. The hardest part is just switching the lights over. I did put them in, but then took them out. I guess until mine comes, Ill clueless to what you meant by that:o .. So, was it hard to get the plastic to fit around the headlights?? Why is it that all the Co. make it so hard for ANYTHING to fit:rolleyes: .. I remember what a beeitch itwas getting on my headpipe for my 300ex.. btu anyhow, I love the look with the headlights on so cross your fingers I can get them on.....:D ;) OH. Any helpful hints like, any extra hardware I should be buying?? sahould I replace any old hardware from the old plastic and put new on?

[SGA]

It should not be too hard. I found this link in the freq asked questions forum. Show us a pic or two when you get it done! :)
http://www.exriders.com/vbb/showthread.php?s=&threadid=53227

[QuadJunkies]

Originally posted by SGA
It should not be too hard. I found this link in the freq asked questions forum. Show us a pic or two when you get it done! :)
http://www.exriders.com/vbb/showthread.php?s=&threadid=53227 Thanks SGA for the good the link!:) Ill use this when I get ready to install.......

[Pvt. Maggot]

what are you doing with the old plastic? let me know. thanks :)

[QuadJunkies]

Originally posted by Pvt. Maggot
what are you doing with the old plastic? let me know. thanks :) Well, I was going to keep my old set for racing season to change out and use my new ones for duning, but after I read the detail in swapping out the plastic, seems like more hassle, so I am going to sell my plastic.. Ill post it in the for sale section:)

[mikeboone]

The Maier Race-cut as I have is very easy to install. It just has two small L brackets that hold the front and the rear bolts up like stock. The stock cut Maier is however a bit longer to get on and off.

[nacs400ex]

My maier is stock cut, and its no harder to get off. The lights fit in the holes fine QuadJunkies, but what I am trying to say is its VERY EASY. The hardest part was just plugging in wires, and tightening bolts.

[QuadJunkies]

Originally posted by nacs400ex
My maier is stock cut, and its no harder to get off. The lights fit in the holes fine QuadJunkies, but what I am trying to say is its VERY EASY. The hardest part was just plugging in wires, and tightening bolts. Thanks for the info......;) I guess if my plastic doesnt sell, Ill just buy more hardware and use them if I bite it big on the track this fall!:eek: :o

[lil400exman]

i am looking for a set of black race cuts front for 250r and rear black fenders low-pros how much did you pay for urs with shippin qj? (if ya dont mid me asking):p

[QuadJunkies]

Originally posted by lil400exman
i am looking for a set of black race cuts front for 250r and rear black fenders low-pros how much did you pay for urs with shippin qj? (if ya dont mid me asking):p Lets see........ I paid in total,256.88 andthat included tax.:) Let us know if you get them and post the pics of it! I love the Black,Silver and Orange Plastics........:macho

[QuadJunkies]

Originally posted by lil400exman
i am looking for a set of black race cuts front for 250r and rear black fenders low-pros how much did you pay for urs with shippin qj? (if ya dont mid me asking):p If you can spare the extra dollars, you should buy a set of full bore.Those ae some really nice plastic:cool: If I hadnt spent all I did this week, I would have....;) Oh well. Christmas is just around the corner....:p

[lil400exman]

Originally posted by QuadJunkies
If you can spare the extra dollars, you should buy a set of full bore.Those ae some really nice plastic:cool: If I hadnt spent all I did this week, I would have....;) Oh well. Christmas is just around the corner....:p
i would when i get more moeny but its over 500 a set:eek2: and ur goign to scratch it up first 3 rides anyways.....................:(

[QuadJunkies]

Originally posted by lil400exman
i would when i get more moeny but its over 500 a set:eek2: and ur goign to scratch it up first 3 rides anyways.....................:( I think you will find Rocky Mountain the best in prices for the Maier.....;)

[lil400exman]

thanks my new setup (lt front end) i got a killer deal on still costed me 1,400 dollars! i got +4's and axis fully adj shocks (triple rate) so i am on a budget now lol!:)

[300exjuggalo]

sweet im gettin some black or blue, when iget my 400

[QuadJunkies]

Originally posted by 300exjuggalo
sweet im gettin some black or blue, when iget my 400 saweet! I just added to my spending today and bought a few other small items like a set of wheel spacers and a set of Mohawk fronts for duning on .160 Douglas. Besides a set of air scoops fo the Predator, Im done until racing in the fall:confused2 lil400exman........ WOW:eek: it adds up quick huh! I know in ll, I have spent around 1400.00 in about threee days too.. We bought a full system for the predator and a few other things, it just adds up WAY too fast....:(

[-=Skot=-]

can't wait to see the new plastic mounted on your quad

[lil400exman]

Originally posted by QuadJunkies
saweet! I just added to my spending today and bought a few other small items like a set of wheel spacers and a set of Mohawk fronts for duning on .160 Douglas. Besides a set of air scoops fo the Predator, Im done until racing in the fall:confused2 lil400exman........ WOW:eek: it adds up quick huh! I know in ll, I have spent around 1400.00 in about threee days too.. We bought a full system for the predator and a few other things, it just adds up WAY too fast....:(
aftermarket companies get ya really bad i just set myself a reserve go up to that and get what i really need then save up more and speend away and hopefully i will have the quad i want by.............say next year?:D

[OCCRA288]

Here's a picture of me and my Zest Orange 400EX coming into the first turn in First place.

[QuadJunkies]

Originally posted by OCCRA288
Here's a picture of me and my Zest Orange 400EX coming into the first turn in First place. Is that Maier? Does full bore make orange for the 400ex? I wasnt sure if I liked orange, but its reallytaken to me now!:blah If I had the $$$ though, I think I would like a custom painted set for duning and havethe guy that full bore reccomended me to do it. They were in the lastest issue of DW.. its a new kind of indestructable paint that doenst chip. his work looks awesome!! Nice pic OCCRA288:blah :macho

[exriderdude]

yea, fullbore makes orange, its kinda a different color than maier though:ermm:

[OCCRA288]

That's Maier, I can't see spending 500$ on some plastic that is gonna be put thru pure HELL every other weekend of the year. I got better things to do with my money.

[QuadJunkies]

They came today!! whoooo hoooo!:p God I swish I could play hooky today :devil Look what else came for he Predator!:eek: :blah I put the headpipe up to it, and ohh its gonna look good! I hope it gets the gains(or even close) to what they say it is

[QuadJunkies]

////

[QuadJunkies]

tank

[QuadJunkies]

The trinity full system....:D

[QuadJunkies]

0000

[HiperEX]

WOW :eek2: i like what ya got there all togther plastic and that trinity pipe looks good cant wait to see some pics of it all put on

[QuadJunkies]

Originally posted by HiperEX
WOW :eek2: i like what ya got there all togther plastic and that trinity pipe looks good cant wait to see some pics of it all put on The trinity is going on the Predator I have a Yoshi full system on mine...they told me it was a LOUd one, w/o the spark arrester(i would have one regarless)And w/ o, its DB is appox 105!:eek: so this should quiet it down a bit. I should be getting my seat color samples in the mail tomorrow to mathc up to the plastic.

[SGA]

The pics look good! Is someone excited ??:D

[QuadJunkies]

Originally posted by SGA
The pics look good! Is someone excited ??:D Why........YES I AM!!!!!:blah :p

[Porkchop]

well go get that stuff installed and take some pictures!!! :D

[QuadJunkies]

Originally posted by Porkchop
well go get that stuff installed and take some pictures!!! :D Well there on and let me tell you. they were FAR from easy to get on......:( more like a pain in the BUTT!:mad: NOTHING wanted to fit properly I think I had a miss fit or something.... I was wondering. why does mine have the mounting bolts showing on top of the fenders?:huh this was the only thing I dont like about them.......but I sure love the way it looks!!!!! Ill post some tomorrow... now I need a new seat!:blah I want some opinoins on some colors Im going to post too, I got my color samples in the mail, hopefully they are big enough for you to see when I post them

[QuadJunkies]

Tahhh Dahhh!!!!! :D Now its time to chop,chop,......:p :blah

[QuadJunkies]

:D

[QuadJunkies]

now Im ordering the new seat cover today.. this one has got to go...:o

[lil400exman]

sweet qj..........just get pro-pegs on there!;)

[QuadJunkies]

So... does everyone still think my idea of doing Orange,black and silver will look good? Or red black silver... I like the orange idea. no one else has that one yet!

[QuadJunkies]

I am VERY pleased with the plastic;)

[QuadJunkies]

ok now. THis doesnt show the colors very well, but this is Carbon fiber orange,black and silver what do you think? I lvoe the idea;)

[QuadJunkies]

This is a different orange, a lighter color, I was thinking with sun fading seato ver time, I kinda like the brighter Orange, what do you think?

[QuadJunkies]

How about with a littel grey thrown on the mix? maybe a little white on my vilyl graphics not sure yet on that one...Ill have to take a look at it in the computer before printing them

[QuadJunkies]

Now all I have to order is new black rings around the headlights(the old ones dont look as nice being faded out a bit) and some black shockwears and black nerfs... HAHA. Pro pegs are saweet,but not sweet enough for close to 300.00:eek: I think Ill get the Arens next....;)

[TheChknhwk]

Plastics look good QJ:D

[QuadJunkies]

Originally posted by TheChknhwk
Plastics look good QJ:D Thanks :) ;)

[quadrcr87]

cant you just get new nerf nets and the seat looks like its in good condition. i would use the money on performance

[QuadJunkies]

Originally posted by quadrcr87
cant you just get new nerf nets and the seat looks like its in good condition. i would use the money on performance Im not buying my nerfs right away;) I am ordering new nets today and new black covers for the headlights..My suspension will come next year, sometime in Aug. Ill be ordering a sway bar ,beadlocks, tires and lowering kit for fall racing..:)

[QuadJunkies]

Originally posted by QuadJunkies
Thanks :) ;) The seat is in good condition, Im just odering a moatching seat cover to go with my graphics Im making

[QuadJunkies]

heres what it loks like before me buffing it out and smoothing and eveneing up the edges(had to do a quick job before duning trip for the wk end) you like??????

[QuadJunkies]

......

[QuadJunkies]

...........

[Chef]

Here is race cut silver Maier on a 400.

[CHAUNCY]

That front pics looks awesome. Just something about it:ermm:

[Porkchop]

Chef who's 400 is that?

[Chef]

A friend of mine's. The lower right a-arm bolt, in the heim end on the spindle, came out last night 5th gear pinned. He hit the wall/hay bales, broke the fence down for 15 feet, broke off two cedar posts, bent the top a-arm, bent the tie rod into an L shape, bent his front bumper, and went about 15 feet off the bike.:eek:

[lil400exman]

dang chef i think you did that.........................:p only someone like you could wreck that good..................:eek2:

[CHAUNCY]

Originally posted by Chef
A friend of mine's. The lower right a-arm bolt, in the heim end on the spindle, came out last night 5th gear pinned. He hit the wall/hay bales, broke the fence down for 15 feet, broke off two cedar posts, bent the top a-arm, bent the tie rod into an L shape, bent his front bumper, and went about 15 feet off the bike.:eek:

:eek2: Was he okay Chef ?

[SGA]

You did a good job on the plastics QJ. Looking at the seat colors, I think the brighter orange is better.

[QuadJunkies]

Originally posted by SGA
You did a good job on the plastics QJ. Looking at the seat colors, I think the brighter orange is better. Its funny, my stock seat color looks really orange now instead of red with the new plastic:p ... Im going to cut it down just a little more and smooth it out on my next day off...;)

[AC 400 ex 02]

i like how you cut the plastic! it looks good QJ!:D

[QuadJunkies]

Originally posted by AC 400 ex 02
i like how you cut the plastic! it looks good QJ!:D Thanks..;)

[Porkchop]

hey QJ how did the trinity full system work on the predator?

[QuadJunkies]

Originally posted by Porkchop
hey QJ how did the trinity full system work on the predator? putting on this wk end. We went duning for three daysand didnt have the time to dial it in this last wk end., also waiting for a couple of new gaskets to put on had to be ordered so hopefully be ready to put on by Fri.:D ;) This should be interesting.No one I know had one, (I was there 3rd customer)but they have been very cool about keeping me updated on any simple mods to help on dialing it in and any HP increases I can get out of it.

[2k2-300exnj]

Originally posted by QuadJunkies
putting on this wk end. We went duning for three daysand didnt have the time to dial it in this last wk end., also waiting for a couple of new gaskets to put on had to be ordered so hopefully be ready to put on by Fri.:D ;) This should be interesting.No one I know had one, (I was there 3rd customer)but they have been very cool about keeping me updated on any simple mods to help on dialing it in and any HP increases I can get out of it.
i cant wait to see some action pics of you guys in the dunes lookin all nice with your stuff on...
i love the way ur plastic looks qj let us kno how the pipe is

[QuadJunkies]

Originally posted by 2k2-300exnj
i cant wait to see some action pics of you guys in the dunes lookin all nice with your stuff on...
i love the way ur plastic looks qj let us kno how the pipe is We got a gasket off a street bike to try so tonight the pipe goes on!!!:blah hope it fits......;)