01400ex
04-29-2003, 04:22 PM
Okay I just got my dyno jet kit and followed the directions for the stage 2.
I have Pilot: Stock
main: Dyno jet 170
Neddle: Dyno jet needle on 3rd notch
Air screw: 3.5 turns out
I followed the directions to a T. It runs great on topend but seems to bog alittle on bottom. I can rev it in neutral and it hesitates then revs if I punch it. But if I just ease it it revs fine.
My mods are E-series, k@n filter, no air box lid, ground header welds, and the dyno jet kit.
I live in pennsylvania and I think altitude is 1000 and 2000 feet.
Please Help.
Later Ryan H.
I have Pilot: Stock
main: Dyno jet 170
Neddle: Dyno jet needle on 3rd notch
Air screw: 3.5 turns out
I followed the directions to a T. It runs great on topend but seems to bog alittle on bottom. I can rev it in neutral and it hesitates then revs if I punch it. But if I just ease it it revs fine.
My mods are E-series, k@n filter, no air box lid, ground header welds, and the dyno jet kit.
I live in pennsylvania and I think altitude is 1000 and 2000 feet.
Please Help.
Later Ryan H.