Houser Problems

[Fast400exRacer]

I've been reading a bunch of posts on houser a-arms and was wondering if you have had any troubles adjusting the camber to get enough negative camber? Some of the pictures i have seen look like the ball joints are adjusted all the way in and yet there is very little negative camber. I am thinking about getting some, either Houser or Jd performance +2 arms for my 400ex.

[QuadTrix6]

the reason the bottom ball joints are adj all the way in is to lessen the chance of breaking. if you unscrew it a bit you can have more negative camber, if you have the bottom screwed in al the way and the top all the way in its close to 3 degrees if you want more you can unscrew the bottom