airheadedduner
04-25-2003, 06:53 AM
I am having some serious jetting issues on my R.
My setup:
86'
Mild port(clean up mostly)
LRD pipe
K&N
CR gasket
carbon reeds
Running AT sea level it misses like crazy and goes through plugs bad. I currently am running a 42 pilot(stock is 45), needle on middle position(stock) and a 160 main. I have tried going to a 38 pilot, still rich. I have gone down to a 152 main, still rich. I put the clip on the second from the top position, still $*(%(#ING RICH.
I put in a new stator. I have swapped coils, and CDI's and every other electrical component with parts off my friends R's. The filter is clean. The reeds are almost new. The carb is spotless and the floats are right and I am not getting air leaks and the head gasket is not leaking. I tried the BR8EV and BR8EG and nothing better. My friends R with a very simalar set up is running 45 pilot, middle clip position, and a 165 main and it runs awesome. Any ideas cause I am freakin clueless.:mad: :grr :mad: :scary:
And I am really pissed cause it broke a god damn ball joint on my breakin ride. Lets just say the resulting crash was quite spectacular. It is now put on "hold stuff up duty" in the garage till farther notice.:scary:
My setup:
86'
Mild port(clean up mostly)
LRD pipe
K&N
CR gasket
carbon reeds
Running AT sea level it misses like crazy and goes through plugs bad. I currently am running a 42 pilot(stock is 45), needle on middle position(stock) and a 160 main. I have tried going to a 38 pilot, still rich. I have gone down to a 152 main, still rich. I put the clip on the second from the top position, still $*(%(#ING RICH.
I put in a new stator. I have swapped coils, and CDI's and every other electrical component with parts off my friends R's. The filter is clean. The reeds are almost new. The carb is spotless and the floats are right and I am not getting air leaks and the head gasket is not leaking. I tried the BR8EV and BR8EG and nothing better. My friends R with a very simalar set up is running 45 pilot, middle clip position, and a 165 main and it runs awesome. Any ideas cause I am freakin clueless.:mad: :grr :mad: :scary:
And I am really pissed cause it broke a god damn ball joint on my breakin ride. Lets just say the resulting crash was quite spectacular. It is now put on "hold stuff up duty" in the garage till farther notice.:scary: