PDA

View Full Version : 400ex-z400


Fleshwound
04-14-2003, 11:40 AM
what parts are interchangable between a 400ex and a z400??
forum
04-14-2003, 11:45 AM
:eek2:
Fleshwound
04-14-2003, 11:49 AM
stop whining...
Juggalo
04-14-2003, 12:09 PM
i think the z uses a honda bolt pattern. a lot of people will tell you shocks but thats not true.
400exBro
04-14-2003, 12:13 PM
shocks won't...

i personly think the z sits higher then the ex and don't like it that much... the power is there but i thought i would have more balls
Fleshwound
04-14-2003, 12:14 PM
what about a arms and axle?
400exBro
04-14-2003, 12:45 PM
i wouldn't use a z axle becuase they don't come with sproket hubs like the exs... a arms not to sure about...ask jeff
Juggalo
04-14-2003, 01:39 PM
plus the Z has an ultra weak axle! i know 2 people that have already bent theirs and they don't even jump big! one of the guys has already broken his frame too!
04-14-2003, 04:02 PM
You can use the 400ex Axle, if you get a different Swing Arm (with 400ex setup on the rear) and 400ex carrier.

no on the a-arms

The wheels will also fit.
04-14-2003, 04:05 PM
you can also run 400ex shocks on the front, that is what I have.
bmw500hp
04-14-2003, 05:12 PM
Is'nt the z400 front shock 17"??????????/:confused:
Juggalo
04-15-2003, 10:36 AM
you can run an EX shock on a Z but not vice versa. the EX shocks will be way too soft on the Z tho. i had my set of works on a Z for a little bit and they were really soft.