View Full Version : 400ex-z400
Fleshwound
04-14-2003, 11:40 AM
what parts are interchangable between a 400ex and a z400??
forum
04-14-2003, 11:45 AM
:eek2:
Fleshwound
04-14-2003, 11:49 AM
stop whining...
Juggalo
04-14-2003, 12:09 PM
i think the z uses a honda bolt pattern. a lot of people will tell you shocks but thats not true.
400exBro
04-14-2003, 12:13 PM
shocks won't...
i personly think the z sits higher then the ex and don't like it that much... the power is there but i thought i would have more balls
Fleshwound
04-14-2003, 12:14 PM
what about a arms and axle?
400exBro
04-14-2003, 12:45 PM
i wouldn't use a z axle becuase they don't come with sproket hubs like the exs... a arms not to sure about...ask jeff
Juggalo
04-14-2003, 01:39 PM
plus the Z has an ultra weak axle! i know 2 people that have already bent theirs and they don't even jump big! one of the guys has already broken his frame too!
You can use the 400ex Axle, if you get a different Swing Arm (with 400ex setup on the rear) and 400ex carrier.
no on the a-arms
The wheels will also fit.
you can also run 400ex shocks on the front, that is what I have.
bmw500hp
04-14-2003, 05:12 PM
Is'nt the z400 front shock 17"??????????/:confused:
Juggalo
04-15-2003, 10:36 AM
you can run an EX shock on a Z but not vice versa. the EX shocks will be way too soft on the Z tho. i had my set of works on a Z for a little bit and they were really soft.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.