swingarm clearance

[nosinjcted]

I'm trying to figure out why my 400 can't wheelie in a straight line, it always pulls to the left. The tire pressures are the same, I don't think the axle is bent. I was able to move the swingarm a little (not much at all) with a pry bar today. Is there supposted to be any play with the swing arm, where the pivot bolt goes through?

[JOEX]

First off....keep that pry bar away from the swing arm:rolleyes:

I'm guessing that the tires are slightly different...try switching them and see if it pulls to the same side or not.

Joe