kc 300EX
04-12-2003, 08:24 AM
Alright, I bought some aftermarket fog lights to put on my quad, and theyre not that hard to hook up. But the directions want them to go directly to the battery, and it has this really cheese non-waterproof switch.......Soooo, I want to know how I can hook these up to my stock wiring, and use my stock light switch if possible........
there are 2 small fog lights, each have a white wire and a black wire, the black wires get hooked together, then are grounded.
The white wires hook together then go to the switch. the switch also has a black wire that is grounded. the switch then has a red wire wich goes to the battery, also containing a fuse.
So, there are 3 wires on the switch, red-goes to the battery
white-goes to the lights
black-gets grounded
I need directions how to hook these up to my stock 300EX wiring so I dont have to connect it to the battery or use their cheesy switch.
Anyone who can help me please do! Any help is appreciated. Thanx
there are 2 small fog lights, each have a white wire and a black wire, the black wires get hooked together, then are grounded.
The white wires hook together then go to the switch. the switch also has a black wire that is grounded. the switch then has a red wire wich goes to the battery, also containing a fuse.
So, there are 3 wires on the switch, red-goes to the battery
white-goes to the lights
black-gets grounded
I need directions how to hook these up to my stock 300EX wiring so I dont have to connect it to the battery or use their cheesy switch.
Anyone who can help me please do! Any help is appreciated. Thanx