Are thte Roll Design IMS pegs worth the $$$?

[RIDER11X]

Are they worth it, or is it just hype?

[Moto92]

My guess is hype, go with these
http://www.exriders.com/reviews/pegextend.shtml

[ex kid]

i don't have them but for 200 bucks bump that. i have my stock ex pegs with hertz peg extentions. they are the best thing i have put on my quad. they havn't lost any grip and have alot of it to spare. ur in pa, so go to a local hare scramble and i'm sure you will see someone with hertz pegs. i got my from a buddy of rob, but i bet if you pm j hughes he could tell you how to get them.

kickup isnt why people want them, with a bigger area on the foot your weight is spread out on the pegs and you got more traction

[RiPPiNiTuP7]

Sweet? Yes...very. Worth $200? Not in my opinion...I got AC Pro Pegs for $155 :ermm:

[ex kid]

even if you want more space for your foot...order a set of stock honda 400ex pegs or buy used ones from ebay or somewhere and either weld or bolt them to the existing peg. but if you want to blow 200 bucks on the roll pegs go ahead. just remeber 200 bucks is like a new set of holeshots.

[RIDER11X]

I'm not sure if they will provide that much of a difference with the support thing, due to the fact that they have a lowered rear rung- so aren't you only standing on the front half of the peg when not leaning over the back of the quad? I'm not sure, anyone have them that knows?

[Merriman]

There not quite finished...hence the lack of teeth.
http://pic1.picturetrail.com/VOL133/1040030/1945724/23320401.jpg

[RIDER11X]

Originally posted by Merriman
There not quite finished...hence the lack of teeth.
http://pic1.picturetrail.com/VOL133/1040030/1945724/23320401.jpg Nice!!!!

[Big - D Racing]

I have them and I love them. They help stablize your feet a lo You don't notice how much the stock pegs suck until you ride a quad with them. The kick-up is also a nice feature. Not to mention they look bad ***. Unless you can make your own like RIDER11X then buy them, I paid $180 for them completely chromed with kick ups through Duncan and they are well worth it. Hey RIDER11X once they're done get them chromed, they will look kick ***. Very nice job you did. If I didn't already have the Roll Pegs I would buy a set off you.

[Merriman]

Originally posted by Big - D Racing
IUnless you can make your own like RIDER11X then buy them, Hey RIDER11X once they're done get them chromed, they will look kick ***. Very nice job you did. If I didn't already have the Roll Pegs I would buy a set off you.


Hey.....Those are my footpegs:p he quoted me. I think I have about 15 bucks worth of steel into them, and a weekends time into making them. They are the same size as the roll designs peg too.

[Mr_Bub400ex]

how're u gonna do the teeth?

[RIDER11X]

Originally posted by Merriman
Hey.....Those are my footpegs:p he quoted me. I think I have about 15 bucks worth of steel into them, and a weekends time into making them. They are the same size as the roll designs peg too.

Do you got them done yet? I would like to see a pic of them.:cool:

[Chanman420q]

i have the roll pegs and there very well made. The teeth are extremely sharp, and after about 10 rides with them, the teeth still look brand new. Cant say that about AC propegs

also, i was able to pick mine up for 150 off ebay brand new...

i think if people tried them, they wouldnt feel so bad about spending that much on a set of pegs..;)

Very nice foot pegs for sure. $200 for em.. heck no

Just helpin pay for Doug Rolls yacht is all your doing..:rolleyes:

[RIDER11X]

Well I decided against the Roll Designs because of the $200 factor. That is WAY too steep for me to justify the cost for footpegs unless they are something spectacular, which they seem as though they are not from reports.
I am planning to go with the Extenders by Santo DeRisi instead. So I'll have to order up a set of those one day soon. Thanks for your input guys.:cool:

[Santo DeRisi]

Here is a pic of our pegs.....
http://www.derisiracing.com/atv/images/footpeg3.jpg

[Santo DeRisi]

Those retail at $79.95 for the pair.
Laser Cut out of Stainless Steel

[remlapr]

Originally posted by Santo DeRisi
Those retail at $79.95 for the pair.
Laser Cut out of Stainless Steel

Nice! - what about location? Do they sit lower/higher or more forward/back compared to stock? Or the same location as stock?

[Bean]

pro pegs suck balls

rolls aint worth 200$ exactly, but the stainless steel wont rust, has a kickup in some cases, and they wont go dull untill you start wearing bricks on the bottom of your boots

[nuttynewt]

I like mine, they are a lot more secure feeling than stock pegs. I got mine for less than $200, but they are still worth the money in my opinion.

[pnut420]

Originally posted by Santo DeRisi
Here is a pic of our pegs.....
http://www.derisiracing.com/atv/images/footpeg3.jpg

Can I use these with the regular AC's, not the Propegs, these basically bolt up to whee the stock ones would be right?

[Santo DeRisi]

Originally posted by remlapr
Nice! - what about location? Do they sit lower/higher or more forward/back compared to stock? Or the same location as stock?

They will be pretty close to the same location as your current peg. Depending on how you mount them to your existing peg will make the difference.

[Santo DeRisi]

Originally posted by pnut420
Can I use these with the regular AC's, not the Propegs, these basically bolt up to whee the stock ones would be right?

You can use those with the regular AC nerf bars but you will just have to use 2 spacers per peg which we will supply.

[JOEX]

Originally posted by Santo DeRisi
Those retail at $79.95 for the pair.
Laser Cut out of Stainless Steel
Do you think they will work with the Arens nerfs?

[Live2Ride300]

Just get another set of pegs, cut the mounts off and weld them to the back of your stockers, just as wide if not a lil wider then the roll pegs and a heck of alot cheaper. You can even make some kick ups for them

[Santo DeRisi]

They will work with those Arens nerf bars no prob

[user101]

ill get some pics of my double pegs i made. two sets of stockers w/ some s/steel kickups. works really well.

[rs169300]

I have the roll with kickups and i will say that they are worth the money. After racing the GNCC seriers with them this year, I will never own a quad without them on it. Your feet take less abuse and even running through mud and water you feet will still stay on.

[hook]

roll lifetime peg worth the money

[Chanman420q]

ditto on everything everyone has said about these pegs

[chrisc]

Any one with IMS pegs , did you buy the heal guards (129.99) or do you really need them with the extra with . just wondering if any one ever slips off with them. Thanks