350X swing arm

[Crazy Honda]

Does anyone know if the 300ex bearing carrier fit in a 350x swing arm or if you can put a 300 axle in one? all help appreciated thanks:confused:

[TORO1968]

This might be a good question to ask over at Three Wheeler World...someone over there will definitely know...

www.3wheelerworldforums.com

-Jordan

[Crazy Honda]

link no worky for me:confused:

[TORO1968]

Yeah, their board is down right now...It's not working for me either.

[countypark]

The carrier and Axle and all the rear end parts will work. You need to put spacers in the area wear the swingarm mounts to the frame.

I have a 350X swingarm for sale and I made spacers so it can be used in the 300EX Frame. I even cut the grooves in the spacers so that you can use the stock dirt caps.

$75 plus shipping.

For another $25 I'll through in the shock and the shock mount. The shock is dissassembled.

[oynot400]

So is the 350x swingarm a little bit narrower compaired to the 300ex? The reason I ask is I just ordered a 350x swingarm, axle, shock set up to put in a buddies 250x. I was under the impression it should bolt right up? :ermm: