PDA

View Full Version : Blown Fuse?



sprtrx300ex
04-06-2003, 05:31 AM
How will I know if i have blown a fuse? How will it work?

kc 300EX
04-06-2003, 07:24 AM
If the fuse is blown nothing will work. Nothing electrical anyways. The lights wont go on, the starter will do nothing.

You should just take off the seat, pull off that white cap and check the fuse to see if its blown.

MX250r
04-06-2003, 11:26 AM
If you start blowing fuses like I did, check your wires that got into your light. There is a circular piece of metal that surrounds the two wires that go to your light and when your riding it the wires bounce and rub on that metel and eat right through the rubber coating. As soon as that wire touches the metal your going to short it out.

sprtrx300ex
04-06-2003, 12:59 PM
what will the fuse look like it is is blown? I think when i was putting on my rear shock I might of hit it and possibly bent it or something.

nojoke4stroke
04-06-2003, 01:06 PM
there is a z-shaped filament in the center connecting one side to the other.if its not connected it is blown.

MX250r
04-06-2003, 01:07 PM
If your quad will start and the lights work than its not blown. Take it out and hold it into light and look through it to see if the wire is broke. YOU WILL SEE A BREAK IN THE WIRE IF IT IS BLOWN!!!!!!!

Sporttrax400ex
04-06-2003, 01:19 PM
MX250r:

If your quad will start and the lights work than its not blown. Take it out and hold it into light and look through it to see if the wire is broke. YOU WILL SEE A BREAK IN THE WIRE IF IT IS BLOWN!!!!!!!


What he said