tecate87
04-05-2003, 12:17 PM
I have used the red button, when it goes into reverse all it does is die right out, no grinding nothing just dies like kill switch.
the 2 black wires going to the sensor on the right side of hte engine, factory connet to one another mid way thru the wires.
but, with engine already running, I pull one of the wires off it will go into reverse and work. shut the bike off with the wire unplugged, back in neutral it wont start.
I have tried reversing the wires, tried another cdi box.
a 300ex has 2 seperate plugs on the right side of the engine. little different.
still looking for other suggestions, really got me confused.
thanks so far
the 2 black wires going to the sensor on the right side of hte engine, factory connet to one another mid way thru the wires.
but, with engine already running, I pull one of the wires off it will go into reverse and work. shut the bike off with the wire unplugged, back in neutral it wont start.
I have tried reversing the wires, tried another cdi box.
a 300ex has 2 seperate plugs on the right side of the engine. little different.
still looking for other suggestions, really got me confused.
thanks so far