Who's quad is better

[FastByDesign]

I know there hundreds of people on this site goin on about how good their quad is, so i want everyone (if they can) post a pic adn tell about it and then we will see whos is better. Aight?:D ;)

[Nausty]

itp holeshot tires
k&n filter
sparks racing x6 exhaust
tag x-5 bars which are bent
909 atv grips
pro design tether killswitch
elka triple rate front shocks w/ ssd and comp adjust
rear aftermarket elka rear shock w/ comp adjust and ssd
hiper carbon fiber rims
billet shifter
ac racing nerfs and bumper
custom heel guards, and skid plates
cut fenders
ss braided brake lines
polished lots o' parts

Mine will pry blow away every quad on this site.... lol, yah right...


I think thats about all I got done

[Pvt. Maggot]

:devil :devil :devil :devil :devil :devil

[Chef]

Do we have to have another thread about this?

Anyway :p

PSI 425cc Cylinder, Dial-a-Dome Head, PSI VEP Powervalve, Hinson 8 Plate Clutch (Basket, Pressure Plate, Hub), Hinson Counter Balance, CR250 Ignition, Billet Ignition Adaptor Plate w/ adjustable timing, Baldwin Gear Set, Carillo Rod, New Factory Crank, Keihin CR500 Carb, Pro Series Oversize Radiator, Stainless Coolant Lines, ESR Billet Temp Gauge, Boyesen High Flow Impeller, Merrell Extreme Billet Waterpump Cover, Center Case PC'ed Trans Blue over Chrome, Cylinder, Side Cases, and Intake Manifold Polished, (there is over 50hrs of labor into the motor, with half of that being machine work) Chrome Burgard +3 A-Arms, Aluminum Heim End Tie Rods, LSR Braided Brake Lines, Frame, Spindles, and Steering Stem Powdercoated Trans Blue over Chrome, Polished Hubs, Stainless Bolt Kit, (Ready for me to be done? Well I'm not, so sit tight) K&N Clamp On Air Filter, RPM -2 Aluminum TT Swingarm(polished), LSR Axle, RAD Carrier, LSR Seat Lock, White Maier Plastic, Custom Cut Seat, AC Nerfs, AC Bumper, Douglas Billet Beadlocks all around, 18x10x10 American Racer Rears, 18x6x10 Fronts, Renthal Bars, and Trick all metal valve stems...lol

[Ralph]

LOOK IN SIG FOR MODS...

[Brad]

Originally posted by Nausty
itp holeshot tires
k&n filter
sparks racing x6 exhaust
tag x-5 bars which are bent
909 atv grips
pro design tether killswitch
elka triple rate front shocks w/ ssd and comp adjust
rear aftermarket elka rear shock w/ comp adjust and ssd
hiper carbon fiber rims
billet shifter
ac racing nerfs and bumper
custom heel guards, and skid plates
cut fenders
ss braided brake lines
polished lots o' parts


I think thats about all I got done

DAmN THAT A NICE QUAD

ac nerf bars (not in pic)
ac heavy duty engine skid (not in pic)
ac wide grab bar (not in pic)
ac skidplate
ac bumper
uni airfilter
renthal bars
black shockwears

look in my sig to

[Brad]

Originally posted by Chef
Do we have to have another thread about this?

Anyway :p

the pic loaded like 2/10

[Black400]

look in sig for mods i have also put on more mods than is in my sig just cant remember:confused: :devil

:rolleyes:

I WIN

[4punksdad]

Originally posted by fourzerozero
I WIN

not so fast........... :o

[RiPPiNiTuP7]

Veruum veruum :scary:

[Brad]

Originally posted by Metalquadrider
look in sig for mods i have also put on more mods than is in my sig just cant remember:confused: :devil \

the 4 runner in the back 4 or 6 cylander?

[cheetah]

Here is mine. See sig for mods. It's a top contender for sure.:o I think though monkeyboy will beat us all with hes and cuzes gas gas.:blah :macho

Originally posted by 4punksdad
not so fast........... :o


close but thats
1 point fourzerozero
0 points 4punks

you do get a conselation prize of a pat on the back and a congrats on nice quad tho

[Bean]

261cc done by K@T, ported by K@T, Wiesco piston, 38mm airstryker carb, FMF fatty, ESR billet flange, Pro Design cool head, Boyseen carbon reeds, K@N filter, outwear, butchered lid, Merrell andonized waterpump cover, polished clutch cover hub, Hinson basket, cr500 springs, Magura clutch, polished stator cover, 86 bottom end and gears, 88 clyinder, Hotrod, black PC'd 89 frame, LSR steering stem clamp, Galfter stainless brakelines, Galfer brakepads, Leager +2 a-arms, Works tripple rate w/ cans, rebuilt stock rear by Pro Action, X-ring chain, Alloy Specialties locknut, Xcalliber axel +4, Holeshot MX's on ITP 190.s, Maier dull plastic, K&K graphics, Tag X-5's, Nac's casesaver, shortenend shifter and brake PC'd, brake rezzie protecter, AC pro pegs, PRM bumper, skids, grabbar, K@K rad shrouds, Nac's polished billet kicker, Hurricane grips, lil polish here and there, K@K seat latch, i think thats it

:confused: :ermm: :confused2 :confused:






but the bike isnt the best on here, but it works for me :)

[2k2-300exnj]

sig for mods soon to be a burgard +1 400 front end with custom works shocks and steel braided lines.... and maybe just to be a d!ck and make it look even better i might through some maier on it... dunno what color(black, silver, white...) we will see depending on how much money i have after i be such a nice guya nd buy my dad new handlebars for his warrior bc he is strapped for cash and wants to rebiuld his quad... hey he pays for mine its the least i can do
oh and i now took the stock honda graphics off my quad
after this weekend i will hopefully have some new pix depending on if my a-arms get here friday

[2k2-300exnj]

mine is not even the nicest 300 but i cant wait for chris to get his quad in here.... well all of his quads in here
waters has some crazy nice bikes and they are always shining
kenny(pappy) also has a nice bike(s) dunno whats goin on with the other one or when it will be done good luck guys
oh and tc505(cant think of his name) has a crazy fast drag bike that will be up there with the winners

[Chef]

Breck, we got the same kicker! WOOT!:p

mine's got new tires..:ermm:

[ChadEXer]

Dang Chef, that R is coming along real nice! When you plan to have it finished??

Anyway heres mine

[skinrider440]

i'll post mine saturday when i get it back

[remlapr]

Originally posted by FastByDesign
I know there hundreds of people on this site goin on about how good their quad is, so i want everyone (if they can) post a pic adn tell about it and then we will see whos is better. Aight?:D ;)

Better?

Fastest? Most Bling? Best MX bike? XC?

I think it depends on what your into...

[forum]

It's not the best lookin machine

[Glow Plug]

:eek2: there a ton of awsome bikes on this site :eek2: hey nausty my 400ex will look like that..... some day :(

[FastByDesign]

Ya James, if your parents will evr consider you getten one:blah :devil

[rookiex]

After a grfx kit an a hood scoop...:o

Hood scoops gotta be a PAIN to put on this thing

[2k2-300exnj]

Originally posted by forum
It's not the best lookin machine
swap those orange rings for some blue ones, and polish a few parts and it would look 100x's better but...




i would still kill for that bike nice job forum

[YLW400]

my junk

[AlaskaSpeed]

Originally posted by 4punksdad
not so fast........... :o LOL....:cool:

[d-14 rider 27]

nice job on your ride forum, ill have my shocks next week and ill get some pics of the 450, hows it run? you race it yet?

[Jellyrolls]

my pos

[toby400ex]

i need some pics of mine while its clean:(, oh and by the way that picture is all bad timing on the camera mans part, not too mention i shouldnt even try jumpin big during my first big xc race.:ermm: :confused2 :uhoh: :bandit:

[Chef]

Originally posted by ChadEXer
Dang Chef, that R is coming along real nice! When you plan to have it finished??

Thanks...I would have had it done last night, but I had to go and do other stuff. My swingarm and some other little stuff is out getting polished, one of my lower a-arms had no bushings, so I am waiting on that, front shocks havent come yet, and I seem to have misplaced my water pump cover :p

[Tjay]

Sacto 400 and 250 mostly stock :devil

[Tjay]

another view

[Glow Plug]

Originally posted by Tjay
Sacto 400 and 250 mostly stock :devil

:eek2: nice yukon :eek2: :eek2:


oh yeha btw nice bikes to :D

[ChadEXer]

Originally posted by Chef
Thanks...I would have had it done last night, but I had to go and do other stuff. My swingarm and some other little stuff is out getting polished, one of my lower a-arms had no bushings, so I am waiting on that, front shocks havent come yet, and I seem to have misplaced my water pump cover :p
I guess you can now see why I like white so much!! To me it just stands out more than any other color, and you can only see that it in real life, pics do no justice!!

[QuadJunkies]

WOw lots of nice rides here!! Well, mine isnt as nice as alot of yours,but they still look good to me.. CHEF,your rides has to be my favorite ...:cool:

[QuadJunkies]

.......

[YLW400]

TJay? Are you new here? Those are some nice quads man. Where are you from?

[trueblue450]

Love the 250 in the 400ex frame.. Looks killer.

[NTPracing22]

so far my vote goes to chef. that things' gonna fly!! i'm just waiting for 2R's to put his 310pv on here...it'll be my #1 vote! show us up 2R's. lol..anyway, here's my babe

[heavy_d]

try to get a new pic soon, have a 1987 Zilla, turbo odded cool head, Mossbarger reed cage, FMF Turbine Core silencer, K&N air filter, I figure it has 70+hp, very very very fast ,should get my paul turner pipe in a few days and working with the head, reeds, and silencer should add another 20+hp

[airheadedduner]

Originally posted by Chef
Do we have to have another thread about this?

Anyway :p

PSI 425cc Cylinder, Dial-a-Dome Head, PSI VEP Powervalve, Hinson 8 Plate Clutch (Basket, Pressure Plate, Hub), Hinson Counter Balance, CR250 Ignition, Billet Ignition Adaptor Plate w/ adjustable timing, Baldwin Gear Set, Carillo Rod, New Factory Crank, Keihin CR500 Carb, Pro Series Oversize Radiator, Stainless Coolant Lines, ESR Billet Temp Gauge, Boyesen High Flow Impeller, Merrell Extreme Billet Waterpump Cover, Center Case PC'ed Trans Blue over Chrome, Cylinder, Side Cases, and Intake Manifold Polished, (there is over 50hrs of labor into the motor, with half of that being machine work) Chrome Burgard +3 A-Arms, Aluminum Heim End Tie Rods, LSR Braided Brake Lines, Frame, Spindles, and Steering Stem Powdercoated Trans Blue over Chrome, Polished Hubs, Stainless Bolt Kit, (Ready for me to be done? Well I'm not, so sit tight) K&N Clamp On Air Filter, RPM -2 Aluminum TT Swingarm(polished), LSR Axle, RAD Carrier, LSR Seat Lock, White Maier Plastic, Custom Cut Seat, AC Nerfs, AC Bumper, Douglas Billet Beadlocks all around, 18x10x10 American Racer Rears, 18x6x10 Fronts, Renthal Bars, and Trick all metal valve stems...lol
:eek2: :huh :eek2:

HOLY CRAP!!!!!!

[K_Fulk]

Guess ill post this again.

[Tjay]

Originally posted by YLW400
TJay? Are you new here? Those are some nice quads man. Where are you from?

Yes I am fairly new to the site(I dont post alot) I live in Sacramento, California

The 400ex is my homies, the 250r is mine



nice yukon oh yeha btw nice bikes to

Thanks, Glowplug its actually a tahoe(same difference)



Love the 250 in the 400ex frame.. Looks killer.

Thanks it makes people double take thats for sure

[QuadTrix6]

ill post mine when i get some more parts in :p

[d-14 rider 27]

chef, i think i got the same radiator is you, we gotta get rid of them and get one from arens cuz ours are over priced half---, garage built stuff, :rolleyes:
http://www.exriders.com/vbb/showthread.php?s=&threadid=52518&perpage=15&pagenumber=1

[ChadEXer]

Heres a little sneak peak of whats happening with the EX! Lowering and alcohol is just about done!:)

[knighttime]

is actually startin to look good :confused2

[airheadedduner]

Chad and Chef need to drag. WHo would win????:eek: :confused: :eek:

[ChadEXer]

Originally posted by airheadedduner
Chad and Chef need to drag. WHo would win????:eek: :confused: :eek:
Dont think that would really be fair! Not only is my bike 65 more cc's than his and on alcohol, but mine is set up for drag and his is setup for TT, thats if your talking about his EX, now his R is a whole different story!!!

[NTPracing22]

i think he was talkin about the r

[ChadEXer]

Originally posted by NTPracing22
i think he was talkin about the r
Well if thats the case then if Chef even got close to building the R right then the only way I would be able to beat him is by pissing in his gas tank before the race,,,,hey Chef if you wanna race me with the R, Ill mix your gas for ya,,,I got a lil secret;)
Ive got a friend with a 350R powervalve that is the fastest R we have seen to date, and Im talking we have been to some big rides\races,,,he usually beats me by about 4-5 bike lengths in 300ft, but he was on alky and I was on gas, now that Im on alky Im sure he will still be faster,,,but for a EX and a powervalve R to even be close is perrty damned amazing if you ask me!!!

[born-to-race]

Hey ChadEXer post some better pics of your 505, I want some.

[2k2-300exnj]

Originally posted by born-to-race
Hey ChadEXer post some better pics of your 505, I want some.
he cant hes got a chit camera lol chad used to have way worse pix be happy man

[ChadEXer]

I will have some good pics in a few days. I got to finish a couple of things up then Ill get some good pics and post them!!! I just thought I would shoot a pic with my POS camera get an idea!!

[FLmxR911]

=D

[Chef]

Originally posted by d-14 rider 27
chef, i think i got the same radiator is you, we gotta get rid of them and get one from arens cuz ours are over priced half---, garage built stuff, :rolleyes:
http://www.exriders.com/vbb/showthread.php?s=&threadid=52518&perpage=15&pagenumber=1

LMAO! Yea, I guess I will trade my 85% bigger Pro Series on a smaller, cheaper Arens one...RIGHT!:rolleyes:

[d-14 rider 27]

Originally posted by Chef
LMAO! Yea, I guess I will trade my 85% bigger Pro Series on a smaller, cheaper Arens one...RIGHT!:rolleyes: lmao, yeah i dunno, i like my garage built junk too, is yours built in griffins garage? thats where my junker came from, and i think itll work ok cuz its not in a nice arens frame, just a stock converted ex frame that wasnt designed for motocross, or a 450, just trail ridin a 24 hp motor

[d-14 rider 27]

oooh, how many volt is that snap-on impact and how much was it if you dont mind me askin?

[Chef]

I think mine must have been built in Brian's garage...But he obviously half ---ed it...look at those welds. :rolleyes: :p

[Chef]

I dont know how many volts it is...but its got alot of power for bein cordless. And I dont know what it costed either, but it wasnt cheap! :p (I kinda jacked it outta my dad's race car shop to tell you the truth :D )

[d-14 rider 27]

I- i mean my dad has a makita its 7.2 volt, plenty of power for everything i trust a cordless impact for perfect for tightening them lil 6mm case bolts, just burp it sung so it just barely impacts and thats good. lol.

[jcv400ex]

Bone stock! :macho :macho

[FastByDesign]

Hey airheadedduner do u got a pic of that, it sure sound might awsome:confused:

[FastByDesign]

hey jcv400ex, how much did she cost ya:confused: :devil

[TURBO33]

here

[TURBO33]

here

[FastByDesign]

Originally posted by Chef
Do we have to have another thread about this?

Anyway :p

PSI 425cc Cylinder, Dial-a-Dome Head, PSI VEP Powervalve, Hinson 8 Plate Clutch (Basket, Pressure Plate, Hub), Hinson Counter Balance, CR250 Ignition, Billet Ignition Adaptor Plate w/ adjustable timing, Baldwin Gear Set, Carillo Rod, New Factory Crank, Keihin CR500 Carb, Pro Series Oversize Radiator, Stainless Coolant Lines, ESR Billet Temp Gauge, Boyesen High Flow Impeller, Merrell Extreme Billet Waterpump Cover, Center Case PC'ed Trans Blue over Chrome, Cylinder, Side Cases, and Intake Manifold Polished, (there is over 50hrs of labor into the motor, with half of that being machine work) Chrome Burgard +3 A-Arms, Aluminum Heim End Tie Rods, LSR Braided Brake Lines, Frame, Spindles, and Steering Stem Powdercoated Trans Blue over Chrome, Polished Hubs, Stainless Bolt Kit, (Ready for me to be done? Well I'm not, so sit tight) K&N Clamp On Air Filter, RPM -2 Aluminum TT Swingarm(polished), LSR Axle, RAD Carrier, LSR Seat Lock, White Maier Plastic, Custom Cut Seat, AC Nerfs, AC Bumper, Douglas Billet Beadlocks all around, 18x10x10 American Racer Rears, 18x6x10 Fronts, Renthal Bars, and Trick all metal valve stems...lol

Hey, my freind says that is pretty crapy..........lol:eek2:

[Glow Plug]

Originally posted by FastByDesign
Hey, my freind says that is pretty crapy..........lol:eek2:


the reson why i said it wasn't "that good" was becasue it is not practical its a srictly drag bike like you can't go out and race mx with it why? becauase with a 425cc that will have to run of eather alchol or 110 + octana gas you can't run it hard for a 20 min moto or your going to have a 12,000 dollar granade bentent (sp?) your legs so it will be a drag racing quad that cannot be trail ridden or motocross withed :)

[FastByDesign]

what???, u just said it wasnt good, why did u go into a big speal about octane and drag bike? :huh :huh :huh

[400exRacerX]

.

:eek:

LMGDAO,


Norm ur such an oober dork:p

[TURBO33]

So do I win the best quad prize?

[NTPracing22]

um...nope, you loose

[250x#93]

I'll post mine sometime, it won't win but its cool:devil

[Brad]

u didnt win because its a raptor

[Brad]

Originally posted by TURBO33
So do I win the best quad prize?

oh wait... theres a prize?

[NTPRacing#19]

yea its a rapter man sorry lol

[400exrules]

yall dont even try this is pointless :D i say Chadexer blows everyone away with the TC 505ex hands down :devil

[TURBO33]

wow! 25,000.00 in chrome and gold and I lose? I kinda figured as much since I am on the ex forums. No problem though I still like having fun. I like some of the quads posted there pretty trick too!
How about this one? It's a Rappy also but.....

[400exRacerX]

Well since this is a honda forum I think most of the people here will vote over a yamaha no matter how much its worth.

[QuadJunkies]

Originally posted by TURBO33
wow! 25,000.00 in chrome and gold and I lose? I kinda figured as much since I am on the ex forums. No problem though I still like having fun. I like some of the quads posted there pretty trick too!
How about this one? It's a Rappy also but..... WOW!:eek: I like the graphics on that one!!! sweet:blah

[ChadEXer]

I think the Raptor is OK, but I personally dont think that chrome and gold goes together too well!! Especially with green??? But thats my opinion, no harm intended!!
400exrules,, thanks man:D

[CBW]

MINE:macho


'03 KFX80 stock everything.......and fast as can be:muscle: :bandit:

[flattracker]

well i hope this works, here's my ride.

[skinrider440]

here's mine

[CBW]

oh ok,,,,here is my quad

[UglyMotha™]

haven't got my other wheels on yet but i guess she looks like every other nacs ex:huh

[CBW]

and this is with my regular wheels...........

[250x#93]

Heres mine, yeah its just a 250x but i think its better than some x's.:p I dunno maybe I'll get a carbon fiber scoop, that would look nice, and some round chrome lights, and maybe some powdercoating.

[250x#93]

UglyMotha that is a purty nice 400:devil Heres another of mine:blah

[QuadJunkies]

Originally posted by CBW
and this is with my regular wheels........... :cool:

[300EX_HMF]

The Suzuki !!!!!! this is thing is a smooth ride!!! it may not look the best, but when u got long travel elka quadrated underneath you, you will be sure to not feel a bump!!

[James70214]

Here my POS with a yamajunk motor!!

[James70214]

or my canabomb

[UglyMotha™]

Originally posted by James70214
or my canabomb


so how fast can you push that thing:huh

[Glow Plug]

lol do you even need a radatior for your dale lol:D

[Ryan]

Originally posted by James70214
or my canabomb

I just noticed that the bottom frame rail is deattachable. Or is that just one of the motor mounts :huh. Pretty cool :cool: .

[James70214]

Yeah the bottom frame rail is detachable. My motor was out at my sponsor(South Bay Moto) getting some work done.

[WildCatRacer]

for all the X fans heres mine.

www.geocities.com/quadrcr4/350X

www.geocities.com/quadrcr4/laegers

[QuadJunkies]

Originally posted by 300EX_HMF
The Suzuki !!!!!! this is thing is a smooth ride!!! it may not look the best, but when u got long travel elka quadrated underneath you, you will be sure to not feel a bump!! ooooooooo. Id like to ride that thang!!!:blah :D :cool:

[QuadJunkies]

Originally posted by Flipper
for all the X fans heres mine.

www.geocities.com/quadrcr4/350X

www.geocities.com/quadrcr4/laegers I was curious,what kind of front tires you are runnin? I will need some radials in a few months and really dont know to much about them...Ill want them for flattrack

[chris29]

Here's mine for ya

[QuadJunkies]

Originally posted by chris29
Here's mine for ya very nice...:cool: I dig your plastic...

[250rtone]

my toys

[WildCatRacer]

quadjunkies:
I got those riken fronts from james lucky www.jlatvproducts.com I think K&K sells them also. If you plan on racing flat track I wouldnt get radials, they're a motocross tire. for flat track go with american racers or hoosiers.

[QuadJunkies]

Originally posted by Flipper
quadjunkies:
I got those riken fronts from james lucky www.jlatvproducts.com I think K&K sells them also. If you plan on racing flat track I wouldnt get radials, they're a motocross tire. for flat track go with american racers or hoosiers. Our track isnt a true blue groove or I would , I hear once in awhile they do but for the most part, the track is a loose and slicked up clay mixure.. it changes from week to week,but Turf tamers seem to be the favorite tire for the rears..