Mounting ProCircuit T4

[SubnetZero]

I picked up a Pro Circuit T4 off ebay

Was wondering, is there supposed to be spacer and longer bolt for the top bolt?
Seems to stick out after linning up the bottom bolt.....

I dont wanna wrench it down a tweak it....

I assume there is no clamp for it to the pipe? there is a groove there like there would be a clamp for it...

[Sparks425Ex]

Yes For the Top Bolt, it should be Long and there should be a Spacer...

[400extracc]

i just purchased a pro circuit t4 off ebay the other day. should get it in a week or so. post what you think about it after u instaled it and take it for a spin.:D

[bmw500hp]

Grab an extra 3/8" socket, works fine if your missing the spacer :p

[SubnetZero]

I called Pro Circuit up

"No, no spacer needed or longer bolt, just use all of your old hardware.. There are no bolts in the package with that pipe"

Also for Jetting he recommended:

162 Main
58 Pilot (???@!!!)
clip on the 3rd
1 1/2 on air


this was after I explained to him its a Stock 400Ex and even reminded him it was 4 stroke heh

58 Pilot?

[Taco]

you might be able to see the spacer in this pic

[F-16Guy]

Originally posted by SubnetZero
Also for Jetting he recommended:

162 Main
58 Pilot (???@!!!)
clip on the 3rd
1 1/2 on air


this was after I explained to him its a Stock 400Ex and even reminded him it was 4 stroke heh

58 Pilot?

Well, I guess you can take that choke off....:p

[carlj75]

Yup, mine came with the spacer also.

[Crawl69]

Mine had the spacer too, what does everybody have their carb jetted at, im about 1300 ft above sea level.