350x conversion Questions

[01_300ex]

I am doing the 350x conversion on to my 300ex, and i was wanting to know where you connect the clutch cable to the engine, and what type of tubing do you use to extend the oil cooler lines with and where do you mount the oil cooler. Thanks

[01_300ex]

Also, where is a place that makes big bore kits for the 350x other then Powroll.

tc will prob do it, why dont u use the oil lines from the 300ex or w/e?

[WildCatRacer]

www.profabatv.com does all honda fourstrokes. I dont know what you mean by where does the clutch cable hook up to the engine? but for the oil lines just go to your local dealer or a auto shop and get some high presure rubber hose. I welded a washer to my frame so I could mount the oil cooler, but there are many different ways you could do it. I'll have to take some pictures of mine sometime.

[01_300ex]

What i mean on the clutch thing is like is there a cable holder on the 350x like there is on the 300ex. It holds the cable from moving so you can engauge the clutch.

[crashinmatt]

my buddy is also doin this, but i believe that the cable mount is on the left side (sittin on the quad) like right behind the cylinder. then tyhe cable goes across behind the cylinder and connects to the arm.

Go here for some good info...

http://www.atving.com/editor/racing/feature/techtip/chassis.htm

[WildCatRacer]

I cant remember how my 300ex cable was, but 85 350x cables run along the right of the cylinder and 86 350x cables run along the left and behind the cylinder like 250xs' did. ethier way it has no effect on your project.