14t sprocket

[jaywoodsrider]

will a 14 t sprocket work with a stock chain, or do i need to add a couple of links

[Martin Blair]

i know it will on a 400 i have oen but i dont knwoa obut a 300, how tight is your chain adjuster? If its pretty loose and theres lots or room to adjust it then you should be fine.

[300exryder]

Yup, a 14 tooth will fit with the stock chain, so long as the adjustment isn' all the way out. I have one on my 300 and it was an easy install, about 10 minutes. Now that I did it, it only takes about 5. The hardest part is shaving down the case saver if you want to keep it on.

[speedy400]

yes it fits, you just have to tighten it a lot.-darren

[jaywoodsrider]

I tried to install it, but the chain was way to tight, i'll mess with it again tomorrow. Are there any tricks to the install

[300EX]

loosenthe chain all the way and slide it on:blah

[jaywoodsrider]

Okay, one more question, there is a brass u type piece, were u guys able to install the sprocket with that piece, or did u leave that piece off.

[2k2-300exnj]

Originally posted by jaywoodsrider
Okay, one more question, there is a brass u type piece, were u guys able to install the sprocket with that piece, or did u leave that piece off.
i think i kno what ur talkin about i did mine like 6 monthes ago but im prety sure i had to leave it off bc the holes didnt line up

[jaywoodsrider]

thanks alot for the help

[speedy400]

mine lined up...:confused: ....

[jaywoodsrider]

just finished the install and i just wanna say wow, what an improvement, i love it and recomend it to anyone with a 300