Clutch Help?? Neutral Problem

[Doibugu2]

I installed one of those magnum easy pull clutches and finally got to take if for a ride this weekend. It is definately and easier pull than stock. But....

I am having a h ell of a time getting the quad into neutral. It just likes to jump right over neutral. I messed with the adjustment on the lever and got it so its okay, but its still a pain.

What else should I due?

[Doibugu2]

da bump

[Pappy]

sounds like you need to adjust the cable a lil more. it could be that the clutch on the easiest setting isnt fully disengaging the clutch

[Doibugu2]

I don't think the clutch has different settings. Or at least know that I know of. Where are they normally located?

Should I take some of the slack out of the line? Its not a ton, but I don't know if its stopping the clutch from disengaging like you say.

[Pappy]

yeah i was refering to the lever not the clutch itself....my bad

id say its still out of adjustment. i did that to mine and it took me a few tries but i finally got it set correctly and no mo problems:)

[Doibugu2]

Did you mess with anything down by the engine?

I'll just keep messing with it. Problem is I got the screw almost all the way out.

[Pappy]

yeah the adjustment at the lever is for the lever freeplay...the adjustment at the clutch(engine case) is for the actual clutch lever i believe.

[Doibugu2]

Okay thanks, I'll mess with it some more.

I need to get to one of those races, so I can try some of your cookn'.

Airdaddy, what a make huh?

[Pappy]

airdaaaaaaaaddddddddyyyyyy:D he is a nut:p