fullbore plastic!!

[kid300ex]

I was wondering where I can find some pictures of a 300ex plastic full or race cut FULLBORE plastix, even on a 400ex, Anyone know there web site? any info would work!

[kabd69667]

You can't beat full bore

[MichaelS693]

THAT PLASTIC IS SWWEEETTTT!!!! WHATS THEIR WEB PAGE....AND DO THEY HAVE PLASTIC FOR 300EX

[330exracer]

its fullboreInnovations.com the 300 plastics are just like the 400s

[stevengates45]

I havent found on any of the sites how much the plastic for the 300 is???? Anybody haev a clue how much the 300 plastic is runnin 4 :huh cause those plastics are sharp!

[330exracer]

it cost the same as all the other plastics.

[330exracer]

o yah like a like a little under 500

[kid300ex]

I'm in love with this plastic! it looks awesome... I'd like to see the race cut on the 300, It'll be my choise when i need plastic!

[kabd69667]

I believe that is the race cut...i think?

[Juggalo]

yes thats race cut but thats 400EX fullbore plastic...the 300EX fullbore plastic looks more similar to stock but still cool

["BLAHH"300!!]

would the 400 fullbore plastic bolt to the 300?
if the 300 doesn't have the vent, thats what i'd want to do
be sharp- slide something in behind it with some blood shot eyes'- little peice of sheet metal with it painted on it or somethin'

[465Stroker]

Here is Fullbore 300EX Plastic.

[465Stroker]

Another one from a distance.

[330exracer]

personaly wouldn't put fullbore 400ex plastics on a 300. because you have to drill threw the plastics and such. and your paying allot of money to get top of the line plastics. and their be holes whee their should be a such. but im pputin stock 400 plastics on mine because their cheaper than 300.

[Poncho]

Fullbore plastics are sweet man.:D

can u get 400ex plastic for a 400ex with headlights, i wnat dark blue :macho

[kid300ex]

465Stroker,

Is your wife sponserd by them? cause I see her picture on the fullbore site, I was wondering if you can scan some pic's of the rear fenders? I'd like to get a better look at them before deciding

[465Stroker]

Yes she is. I can get pictures, but it will be a day or two. They are identical to the honda mold as far as I can tell.

[kid300ex]

Thats sweet!!! Ah dont worry about it then, In one picture on the fullbore site the rear fenders look like they sink at the top behind the sag.... its hard to deiscibe but it's nothing, thanx

Do you know the price for a full set?

[Pro400EXC]

OMG of course thats Race Cut. 1st of all you stole my pic that I posted before,then you don't even know what kinda cut they are,c'mon now,if your gonna steal my pics,at least know about it first. 2nd NO YOU CAN"T get it with headlights. and they only make 4 color choices. Red,Yammy Blue,Black,and White. You can get cut,or full fenders. They cost $200 for front and $200 for year. Thats the only pics of a 400ex with full bore plastic!

[kid300ex]

465Stroker,
What all do you have on that bike for parts and stuff?

[kid300ex]

also could you post a picture of your quad? thanx

[465Stroker]

2000 300EX -
2000 Gusseted & Powder Coated Frame
TC Racing 330 or 405EX motors
TC Racing Exhaust & CDI Modifications
Lone Star Racing - +2" A-arms, +1" Swingarm, Axle, Axle Carrier, Anit Fade Locknut, +1" Steering Stem, Steering Stem Clamp, Front Hubs, etc.
PEP ZPS Shocks - Front and Rear
Douglas Wheels - 4"-1" Offset Fronts, 9" Rear Beadlocks
Pro Tect Skids - Stainless Swingarm, Aluminum Belly
PRM - Baja Bumper and Grab Bar
Cycra - Probend Handguards
Notoil - Airfilters & Oil
Outerwears - Shocks and Air Filter Covers
Maxxis - Razr 6 ply Tires
DP Brakes - Rotors & Brake Pads
Zing - 400EX Graphics & Seat Cover
Smith - Goggles & Grips
Cometic - Gaskets

465, where did they gusset the frame, how many, and where could Iget it done, I have heard of this being done on 250r and 400ex stock framesto make them more rigid too. is it very exspensive?

[465Stroker]

I gusset the frames myself. I can get pictures this weekend for you. Basically the bottom rails (below the engine) break near the round tube that the lower footpeg bolt fastens to. Also near the upper rear shock mount - starter selinoid area.
I TIG weld in a total of 6 pieces, and have no failures yet.
If you plan on racing a 300EX, this is a vital chore that should not be left out, especially if you have your quad torn down. 300EX frames are very expensive, and much harder to repair after they have broken.

[Taco]

I would like go see those pictures.

[Foxrage]

Stroker465,

I think your wife is in the february issue of Dirtwheels. She won the championchip. She is good.

465, I would appreciate seeing those pictures, I might do a few local harescrables this summer and maybe a little xc racing, but mostly just aggressiove trail riding/racing with my buddies for fun. I like modding my atv to not only be faster, but more durable, comfortable, good looking, and handle better. Merry Christams to everyone.

[465Stroker]

Here are the pictures. This is the botom rail gussett. I took a piece of 1" x 2" Chromoly stock and ripped it at an angle & TIG welded it. The actual piece starts at about 1" and tapers down to 6" in length. This is done to both sides of the frame.

[465Stroker]

Here there is a gusset to the left and right of the vertical fram rail. The gusset between the rail and starter selinoid is much small since there is not too much room available. These pictures would have been much better if they were taken before the powder coating. You can also get a view of the lower frame rail gusset from this photo.

[465Stroker]

Last and final one. This is a picture of the exhaust side of the quad. Frame is gusseted on both sides of the vertical frame rail. You can install larger gussets on this side of the frame. Once again, take a look at the lower frame rail gusset. You can get a much better look at it from this photo.

[kid300ex]

i cant really tell the diffrence except for the gussets on the bottom frame rail, but put it to a stocker i'd tell the diffrence, Is this really hard to do?? Could you post some pictures of your quad 465Stroker?? So is that the color of you wifes quad now?

[465Stroker]

I will be getting some pics of my own very soon. Been real busy building my own house lately. Traci's quad will be all white and chrome for the 2002 season.

[kid300ex]

that will look awesome for the 300, Same plastic color the right?

[465Stroker]

Yep, Basically the same quad as the red one - But all white. White Frame & Plastic. Chrome A-arms, swingarm, steering stem, axle, etc. It was a 5 hour 2001 300EX that I bought and tore down to build up. It will be brand new for the 2002 season opener in Florida.

[Chef]

Originally posted by 465Stroker
Yep, Basically the same quad as the red one - But all white. White Frame & Plastic. Chrome A-arms, swingarm, steering stem, axle, etc. It was a 5 hour 2001 300EX that I bought and tore down to build up. It will be brand new for the 2002 season opener in Florida.

That will be sweet...

[kid300ex]

Yes, the will look very pretty........ Hey 465Stroker, since you used that fullbore plastic for Xcountry, thats same as wood riding so my question is, how does that plastic hold up to scratches and fading around the gas tank where your legs rub??

[400exRacerX]

I got my frame powder coated and gussetted, I'll have to get some closer pics of the gussetts. It was gussetted at the top shock mounts, and the lower frame rail by the footpegs.

465, thank you so very much for the info on gusseting and the pics, I know it was alot of trouble, I wish there was someone Icould try and help you out.

[kid300ex]

How does that plastic hold up too fadeing and scrathes?