Powerbong stuck?

[Ketch]

Does any one have any ideas to get a powerbong and a q4 apart.
It's been together for about 18 months now and i try to get them apart and it's like ther welded now. I tryed to hammer on them to get them a part and no go. I think Rico had this problem a while back. Any ideas
well be a big help. thhanks Ketch:confused2

[Steve-o 400EX]

Try some nut buster or penatrating oil, maybe that can get in there and help separate em.

[RAPTORAZ]

Good luck getting them apart. It's gonna take some penetrating oil, a lot of force, and a lot of foul language. On a side note, next time put antisieze on the two parts. They'll come apart much easier.

[muff]

well leave the powerbong mounted up tight, and twist the q4 off of it, you'll also need some penetrating fluid, you can use wd40 but i have this stuff called Liquid Wrench that works like a charm

odds are the O-ring inside the silencer is melted and causing them to stick together..use a little elbow grease and you should be fine..:D