Oil Cooler

[Threewits]

Any chance any of you guys would have a Jag oil cooler setup laying around that you might part with?

765-346-9610 elmo5333@yahoo.com

[rooster300ex]

I would go with a type like GDH racing makes, you can also make your own for cheap. Just gotta cut the metal oil line, and find the lil cooler they use. Do some searching and u will find how to make it.

[miniquaddad90]

The metal line cooler setup is not nearly as effective as a JAGG style. You can contact JAGG and they will sell you the side cover plate with fittings then you can use a 400ex cooler as a cheaper alternative

[rooster300ex]

The metal line cooler setup is not nearly as effective as a JAGG style. You can contact JAGG and they will sell you the side cover plate with fittings then you can use a 400ex cooler as a cheaper alternative

Just curious as to how u came up with this. Either way it pumps the oil to a cooling source. It can't be that big of a difference to matter. And from what I've seen a 400ex cooler is not cheaper.

[miniquaddad90]

Hooking up oil cooler at metal line to head only cools the oil going to the head. The Jagg set up cools all of the oil, after the filter, then bottom and top end receives cooled oil. Make sense?